Hi all,
Just registered today.
I've got a '96 jackaroo SE V6 3.2, 40mm susp. lift thats about it for now.It's primarily the shopping trolley so the misses doesn't want me playing with it to much.
My toy is a '93 Isuzu MU 3.1 TD torsion bars wound up with calmini extended shackles on the rear, snorkle, uhf, bull bar, cibie super oscar lights. If anyone can tell me how to post photos I'll stick a couple up.
http://i207.photobucket.com/albums/bb40 ... 7Small.jpg
http://i207.photobucket.com/albums/bb40 ... rSmall.jpg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Roll call! Sign in.
Moderator: Moderators
My name is Dave and I'm from WA. I have a 92 Jackaroo with a 3.1 TD. So far its pretty much stock as I've only had it a couple of weeks, So far it has got a new CD/MP3 player, CB, and a set of Rallye 4000 FF Compact Spotties.
Planning to fit new shocks, snorkel, air compressor, front locker and homemade rear shelf/draws.
It drives great, good on fuel. its done 400,000kms and the engine 75,000 (water pump failure killed the old one) no problems so far.
Planning to fit new shocks, snorkel, air compressor, front locker and homemade rear shelf/draws.
It drives great, good on fuel. its done 400,000kms and the engine 75,000 (water pump failure killed the old one) no problems so far.
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol
righto..
Sim - Durack Brisbane
stock standard, apart from DIY custom roof console
have 2 spotties sitting here... waiting for something to attach to...
might just bolt them to the bumper
soon to come:
Rock sliders
Draws
Camping frame (folds onto draws when not in use) (need a better name)
what i want:
bullbar
steel rear bumper
front diff locker
2" or more suspension lift
larger tyres
Sim - Durack Brisbane
stock standard, apart from DIY custom roof console
have 2 spotties sitting here... waiting for something to attach to...
might just bolt them to the bumper soon to come:
Rock sliders
Draws
Camping frame (folds onto draws when not in use) (need a better name
)what i want:
bullbar
steel rear bumper
front diff locker
2" or more suspension lift
larger tyres
Hey there my name is Tristan I'm in Perth. I love my fourbying and I have a 2002 model Rodeo which I bought brand new in January of 03. I havent done too many mods to it just got rims and tyres built a Laptop GPS console for it and added water tanks cheap spotties and a uniden GPS 105 UHF. I am planning on a lift and bullbar when I get the cash for it. Here are some pics of my car (Sorry about the large size of some of the pics if it is a problem I will resize them I just havent had much time lately)
Hi everyone im from denmark WA just purchased my xs 93 jackaroo today. 3.1d turbo intercooled stock standard at the moment but im thinking 3 inch springs nd squezen some 32s under those guards 
. haha i think i got a nice contrast...wit my new jack for comfort on the beach nd long trips nd my 84 sierra for the more hardcore stuff. 2 cars aint bad for a 16yo
im gona make some rock sliders/side steps
sump guard
and try protect the cv's a bit better
and then im gona enjoy...
. haha i think i got a nice contrast...wit my new jack for comfort on the beach nd long trips nd my 84 sierra for the more hardcore stuff. 2 cars aint bad for a 16yo im gona make some rock sliders/side steps
sump guard
and try protect the cv's a bit better
and then im gona enjoy...
Muvitmadness sik MU
Hi
I'm from western sydney & I've been driving a 93 swb isuzu MU for the last
3 years & loving it
although i noticed theres not many mu owners on this forum ? if any at all. Must be all over at www.clubisuzu.com
All good though
MODS:
*engine is 2.8 T/I runnin 15psi
*K/N filter,optima battery.
*GQ front & Rear diffs with ARB air locker 4.8s
*rear chromoly lower arms Modified front lower arms
*Custom tail shafts both with double cardins
*Front A-link set up (no pan hard rod)
* Adj rear pan hard
* 45mm big bores all round
*Sva 9way adj steering dampner
*36 s/s iroks on 16x10 eagle alloys
*Sliders,rear barwork etc
*12000lb wench
*1368 rti on a 25 degree ramp
*Oh & its fully engineered
*12" overall lift
Theres plenty more if you jump on the club isuzu site in trips & events
Cheers
muvitmadness
I'm from western sydney & I've been driving a 93 swb isuzu MU for the last
3 years & loving it
although i noticed theres not many mu owners on this forum ? if any at all. Must be all over at www.clubisuzu.com
All good though
MODS:
*engine is 2.8 T/I runnin 15psi
*K/N filter,optima battery.
*GQ front & Rear diffs with ARB air locker 4.8s
*rear chromoly lower arms Modified front lower arms
*Custom tail shafts both with double cardins
*Front A-link set up (no pan hard rod)
* Adj rear pan hard
* 45mm big bores all round
*Sva 9way adj steering dampner
*36 s/s iroks on 16x10 eagle alloys
*Sliders,rear barwork etc
*12000lb wench
*1368 rti on a 25 degree ramp
*Oh & its fully engineered
*12" overall lift
Theres plenty more if you jump on the club isuzu site in trips & events
Cheers
muvitmadness
96TI isuzu mu sas with gq patrol diffs 4.8s
f/locker bigbore shocks 36 iroks on eagle alloys. front A-link capable to 1452rti on 25deg ramp. 12" overall lift custom barwork & tailshafts.
f/locker bigbore shocks 36 iroks on eagle alloys. front A-link capable to 1452rti on 25deg ramp. 12" overall lift custom barwork & tailshafts.
I don't know if I want to post a pic of mine, after that... Gawd, that's tough, muvitmadness. .
Hi, I'm from n/w end of suburban Sydney, and I have had a bone stock '96 Frontera for the last 6 months or so. It's my first 4bie, so expect some real n bish qu's out of me, ok!.
I'm not gonna list up all the wants I want to do to the Frony, right now, as it's some serious day dreaming, but I will read and listen, and try to learn as much as I can.
Cheers'
Steven
.Hi, I'm from n/w end of suburban Sydney, and I have had a bone stock '96 Frontera for the last 6 months or so. It's my first 4bie, so expect some real n
bish qu's out of me, ok!.I'm not gonna list up all the wants I want to do to the Frony, right now, as it's some serious day dreaming, but I will read and listen, and try to learn as much as I can.
Cheers'
Steven
my names John (JB).
My ride..(if you want to call it that).
97 Jackaroo.
Forest Green.
3.5 V6.
4speed auto (not working at this point..
)
260xxx k's.
Mods.
Arb winch bar
Long range tank
CB.
Future mods..
33s
Winch
Lighforce spotties
2" body lift
new shocks.
But have to get it to move first.
Will post up some pics later.
My ride..(if you want to call it that).
97 Jackaroo.
Forest Green.
3.5 V6.
4speed auto (not working at this point..
)260xxx k's.
Mods.
Arb winch bar
Long range tank
CB.
Future mods..
33s
Winch
Lighforce spotties
2" body lift
new shocks.
But have to get it to move first.
Will post up some pics later.
Hey Guys,
My name is Nick. I have been on here for a few months now. I have a Holden Frontera Sport M7. Its my first 4x4 and Its stock as apart from the CD player haha. I have been to Fraser Island in it and it went realyl well on the sand and through some of the tracks. I would love to do some mods to it, but im a bit short for cash atm.
I'll leave you with a pic. Cheers
My name is Nick. I have been on here for a few months now. I have a Holden Frontera Sport M7. Its my first 4x4 and Its stock as apart from the CD player haha. I have been to Fraser Island in it and it went realyl well on the sand and through some of the tracks. I would love to do some mods to it, but im a bit short for cash atm.
I'll leave you with a pic. Cheers
* Such Is Life *
hello all
I am new to this site and have read previous posts in the forum before signing up when we started rebuilding our 1988 jackaroo engine.
I thank members here as some posts have been very helpful.
If I knew how to upload photos to this forum I would post pic's of our beast who looks very sad at the moment in pieces
I joined this site as we are now stuck with this rebuild and We are tired of receiving responses from mechanics in the real world of our local area who shy, cringe or ark up when the word Jackaroo is mentioned.
nice to meet you all
I am new to this site and have read previous posts in the forum before signing up when we started rebuilding our 1988 jackaroo engine.
I thank members here as some posts have been very helpful.
If I knew how to upload photos to this forum I would post pic's of our beast who looks very sad at the moment in pieces
I joined this site as we are now stuck with this rebuild and We are tired of receiving responses from mechanics in the real world of our local area who shy, cringe or ark up when the word Jackaroo is mentioned.
nice to meet you all
Hi all,
I'm from NZ and have an 84 bighorn,have had for a couple of years
but haven't done much in the way of mod's
Just a homemade snorkel and bullbars
Warn 9000 winch
1" Body lift
Wound up front, Hilux shackles in back
Mixture of silverstones and Mickey's
AND lot's of alternators,clutches,cv's,and front diffs replaced.
Damn
Would show pic if could but dunno how.
[/url]
I'm from NZ and have an 84 bighorn,have had for a couple of years
but haven't done much in the way of mod's
Just a homemade snorkel and bullbars
Warn 9000 winch
1" Body lift
Wound up front, Hilux shackles in back
Mixture of silverstones and Mickey's
AND lot's of alternators,clutches,cv's,and front diffs replaced.
Damn
Would show pic if could but dunno how.
[/url]
Gday Adam from Newcastle.I drive a 00' 3.5 v6 Jackaroo.So far its been lifted and rides on 33x12.5x15 baja claws on -27 deg offset black sunnies.Also has ARB winch bar,front auto lokka,airtech snorkel,65mm flexi flares,GME uhf and antenna and in dash dvd.
http://s256.photobucket.com/albums/hh16 ... U01293.flv
http://s256.photobucket.com/albums/hh16 ... U01293.flv
how did you do the laptop gps? ive been looking into this. found a lot of nformation. i run tomtom on my mobile with a bluetooth gps for town. what software ect do you run on the laptop?
Phreaq wrote:Hey there my name is Tristan I'm in Perth. I love my fourbying and I have a 2002 model Rodeo which I bought brand new in January of 03. I havent done too many mods to it just got rims and tyres built a Laptop GPS console for it and added water tanks cheap spotties and a uniden GPS 105 UHF. I am planning on a lift and bullbar when I get the cash for it. Here are some pics of my car (Sorry about the large size of some of the pics if it is a problem I will resize them I just havent had much time lately)
Hey I'm Harry from Perth, West Aus.
I've got a 98 Jackaroo 3.5 V6, Auto
Mods:
2" Lift
DIff Drop
BJ flip
Airbags
UHF
Dual Batts
LPG
Sound System
Tranny cooler
Compressor
285/75 R16 Muddies (33x11.5 R16)
Some Pics:
Before:
Some 33x12.5's with -27 offset I had for a while:
Now with Muddies:
Wish List:
34's
New shocks
Extended brake lines
extra inch of lift
Barwork
I've got a 98 Jackaroo 3.5 V6, Auto
Mods:
2" Lift
DIff Drop
BJ flip
Airbags
UHF
Dual Batts
LPG
Sound System
Tranny cooler
Compressor
285/75 R16 Muddies (33x11.5 R16)
Some Pics:
Before:
Some 33x12.5's with -27 offset I had for a while:
Now with Muddies:
Wish List:
34's
New shocks
Extended brake lines
extra inch of lift
Barwork
Formerly known as Westoztroopa...
Hi all,
Been a while since I've been here. Sorry for the lack of imagination with the new username.
Actually only just sold the Jackaroo Shorty (see page one). Definitely came close to shedding a tear when the Jack drove out the driveway... Was such an awesome 4x4!
All good things come to an end though and you will be happy to know that I have remained with the Isuzu team. Just over a year ago I purchased a new 2008 3.0tdi Single Cab Rodeo 4x4. Very good and reliable it has been so far too. No extreme mods at this stage - just canopy, bullbar, spotties etc. First mod will be a 50mm suspension lift. Not aiming to modify to the extent of the Jack but who knows??
Cheers,
Noel
Been a while since I've been here. Sorry for the lack of imagination with the new username.
Actually only just sold the Jackaroo Shorty (see page one). Definitely came close to shedding a tear when the Jack drove out the driveway... Was such an awesome 4x4! All good things come to an end though and you will be happy to know that I have remained with the Isuzu team. Just over a year ago I purchased a new 2008 3.0tdi Single Cab Rodeo 4x4. Very good and reliable it has been so far too. No extreme mods at this stage - just canopy, bullbar, spotties etc. First mod will be a 50mm suspension lift. Not aiming to modify to the extent of the Jack but who knows??
Cheers,
Noel
Holden Rodeo 3.6 V6 Petrol dual cab ute
Holden Rodeo 3.6 V6 Petrol dual cab ute, Dual fuel, canopy, roof racks, cd player.
Wish list.
Winch, Winchbar, Snorkel, 2 inch body lift, 31's, UHF, diff and tranny breathers. and probably alot more
Wish list.
Winch, Winchbar, Snorkel, 2 inch body lift, 31's, UHF, diff and tranny breathers. and probably alot more
tyres arent floaties
Re: Roll call! Sign in.
Hey guys, I used to own a Cruiser but got out of the scene and I have no returned with this.
Model: 2010 Holden Colorado LX 4x4
Colour: Black Sapphire
Bodykit: Nil
Engine Type: 3L Common Rail Turbo Diesel with top mount cooler
Engine Mods: Nil
Power: 120Kw
Exhaust: Yes it has one
Gearbox: 5spd manual
Diff: LSD
Brakes: 280mm ventilated front discs with dual piston calipers. 295mm rear drums with leading/trailing shoes
Suspension: High Rise front suspension, Rear suspension: Alloy steel semi-elliptical leaf springs and gas pressurised shock absorbers. Increased ground clearance
Wheels/Tyres: 16" steelies with black stuff around them
Interior: Deep dish floor mats and a dash mat
Other Mods: Soft tonneau and towbar
Stereo: factory Mp3
Contacts: Westpoint Holden
Future Mods: hmmmmmmm lots of ideas but no money.
Model: 2010 Holden Colorado LX 4x4
Colour: Black Sapphire
Bodykit: Nil
Engine Type: 3L Common Rail Turbo Diesel with top mount cooler
Engine Mods: Nil
Power: 120Kw
Exhaust: Yes it has one
Gearbox: 5spd manual
Diff: LSD
Brakes: 280mm ventilated front discs with dual piston calipers. 295mm rear drums with leading/trailing shoes
Suspension: High Rise front suspension, Rear suspension: Alloy steel semi-elliptical leaf springs and gas pressurised shock absorbers. Increased ground clearance
Wheels/Tyres: 16" steelies with black stuff around them
Interior: Deep dish floor mats and a dash mat
Other Mods: Soft tonneau and towbar
Stereo: factory Mp3
Contacts: Westpoint Holden
Future Mods: hmmmmmmm lots of ideas but no money.
Rookie
Current Ride
2010 Colorado - unmolested for now.
Old Ride
88 Cruiser Middy Frp Top
33" BFG All Terrains, Tjm Bullbar, Dual Batteries & Some Awesome Tunes
T-T-T-T-T Turbo
Current Ride
2010 Colorado - unmolested for now.
Old Ride
88 Cruiser Middy Frp Top
33" BFG All Terrains, Tjm Bullbar, Dual Batteries & Some Awesome Tunes
T-T-T-T-T Turbo
Re: Roll call! Sign in.
PWR now online, if you need any info please contact me,
"PWR are specialist manufacturers of heat exchangers for the automotive aftermarket. We build all of our product in Australia and we have a large range of radiators, intercoolers and oil coolers suited to 4WD’s, we also custom manufacture to suit custom setups. PWR would like to answer any cooling questions that you may have..
Just to let you all know we are also building a Holden Colorado that will race in the 2011 Australasian Safari and will be driven by Craig Lowndes. The Colorado will have a LS1 V8 six littler engine and will be heavily modified to complete race spec. We will post links I this forum to our website so that you can see this custom beast in the making… "
Thanks
Adam
"PWR are specialist manufacturers of heat exchangers for the automotive aftermarket. We build all of our product in Australia and we have a large range of radiators, intercoolers and oil coolers suited to 4WD’s, we also custom manufacture to suit custom setups. PWR would like to answer any cooling questions that you may have..
Just to let you all know we are also building a Holden Colorado that will race in the 2011 Australasian Safari and will be driven by Craig Lowndes. The Colorado will have a LS1 V8 six littler engine and will be heavily modified to complete race spec. We will post links I this forum to our website so that you can see this custom beast in the making… "
Thanks
Adam
Re: Roll call! Sign in.
Just got myself a Jackaroo Monterey V6 petrol as a daily driver, family car. Keep the Patrol purely for camping/offroading.
Great to drive but managed to run out of fuel and now check engine light is on
Great to drive but managed to run out of fuel and now check engine light is on
Ransom note = demand + collage
Re: Roll call! Sign in.
Hi Folks,
My name`s Dave, I`m from England, UK
I currently have 3 Frontera`s.
The first is standard 2.8 Diesel turbo, the second is standard 2.2 petrol with LPG conversion. My third one(which is poorly at the moment) is a `B` series frontera 2.2DTi, this one has the folllowing modifications;
3" body and 3" suspension lift, ARB difflocks front and rear, 285/75-16" Good Year MTR tyres, rock sliders, front Hydraulic winch, rear electric winch,twinned fuel tanks for veggie oil user, snorkle.
May I say this site looks very technical.
My name`s Dave, I`m from England, UK
I currently have 3 Frontera`s.
The first is standard 2.8 Diesel turbo, the second is standard 2.2 petrol with LPG conversion. My third one(which is poorly at the moment) is a `B` series frontera 2.2DTi, this one has the folllowing modifications;
3" body and 3" suspension lift, ARB difflocks front and rear, 285/75-16" Good Year MTR tyres, rock sliders, front Hydraulic winch, rear electric winch,twinned fuel tanks for veggie oil user, snorkle.
May I say this site looks very technical.
Difflock Dave.
www.muddyfrontera.co.uk
www.muddyfrontera.co.uk
Re: Roll call! Sign in.
Hi all,
My name is Damien, my 'partner in 4WD grime's' name is Gem.
and were from Cerntral Yorke Peninsula, South Oz!
Were going to be starting a build on a KB Rodeo, so thought we'de pop in and say 'Hi', and indroduce ourselves.
Were keen 4WD'ers, we have been exploring what SA has to offer over the last 5 years together, from Flinders to Adelaide Hills and Yorke Peninsula. Weve had a range of vehicals to play with that we have built up together starting with an FJ40 series, 55 series, numerouse 60 series cruisers, a couple of Patrols, Suburus, Suzuki's, Datsuns, Range Rovers, and now a KB Rodeo!
We have BIG plans for this one!
See you round,
Damien & Gem
My name is Damien, my 'partner in 4WD grime's' name is Gem.
and were from Cerntral Yorke Peninsula, South Oz!
Were going to be starting a build on a KB Rodeo, so thought we'de pop in and say 'Hi', and indroduce ourselves.
Were keen 4WD'ers, we have been exploring what SA has to offer over the last 5 years together, from Flinders to Adelaide Hills and Yorke Peninsula. Weve had a range of vehicals to play with that we have built up together starting with an FJ40 series, 55 series, numerouse 60 series cruisers, a couple of Patrols, Suburus, Suzuki's, Datsuns, Range Rovers, and now a KB Rodeo!
We have BIG plans for this one!
See you round,
Damien & Gem
Who is online
Users browsing this forum: No registered users and 2 guests