Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq front spring hangers

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 186
Joined: Wed Aug 30, 2006 3:06 pm

mq front spring hangers

Post by Chook350 »

Hi, i gota change my bushes on the front end, the shackle bushes the rubber ones in the spring arnt the prob, the steel bush in the spring hanger is really worn, are they likely to seize in there? Or am i better off cutting the hangers off and fitting new ones? if so where could i get them from?
Top
Posts: 89
Joined: Sat Dec 10, 2005 10:26 pm
Location: North Qld

Post by jcclures »

They will normally drift out with a bit of persussion, or put a hacksaw blade through the bush and fit to hacksaw and cut a slot through the bush, you might have to cut two cuts and drive the bush out in two half’s.
1986 Nissan MK Deluxe, 1uzfe quad cam V8, Bull bar, Thomas Winch
Super Oscar Spotlights, Sliders with Body lift, And Long-range Fuel Tanks.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests