Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

air locker safe pressure

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 106
Joined: Wed Dec 28, 2005 4:22 pm
Location: Tamworth

air locker safe pressure

Post by beavis »

okay, if i was to run a generic compressor to difflocks via a tank, what would be a safe pressure to activate the locks?Have seen those 100psi arb switches on ebay for $20, is that the operating pressure.
LN106 1uzfe - 33's - crawlers - locker
HJ61 Sprung over -20psi - 35's - dual locked
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

the standard range is 70psi to 110psi
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 106
Joined: Wed Dec 28, 2005 4:22 pm
Location: Tamworth

Post by beavis »

Thanks, the other option i want to pursue is regulating the pressure to the locks, and running the compressor to full capacity via a storage tank.
LN106 1uzfe - 33's - crawlers - locker
HJ61 Sprung over -20psi - 35's - dual locked
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

easy done aswell
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

90psi is max reconmended pressure. I have a Typhoon compressor feeding a 20l tank with a pressure switch cycling the compressor at 80 to 110psi. I have a non return to the compressor and the locker outlet is regulated to 90psi. Is alot simpler than it sounds
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

you can get regulators from supercheap for $12. Dunno how good they are though.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest