Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Can I have some P/S , please.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Rvl
Posts: 24
Joined: Tue Oct 14, 2003 9:19 pm

Can I have some P/S , please.

Post by Rvl »

Who makes a bolt on power steering kit?
My desire for power steering surpasses my skills(and confidence)in installing steering components. And since I reside in Japan I can't ask one you guys and the local shops here don't want to touch it.

Thanks

Robert VanLane
80 Hilux Lockd, Exo'd,Caged and Bobbed
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

You don't need a "kit" as Hiluxes have factory p/steering so just roll on down to the local wreckers & grab a set up off a similar model & bolt it on. :D
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Kev80 wrote:You don't need a "kit" as Hiluxes have factory p/steering so just roll on down to the local wreckers & grab a set up off a similar model & bolt it on. :D


These are prob very rare over there. As most Jap spec Hilux/Surfs were IFS.

If you can find an early Solid front axle surf the power steering kit will bolt on. This is if you are running a deisel engine. You will need the Box including the mount and steering shaft, Lines, pump and bracket and also the balancer off the front of the engine if you dont allready have enough spare belt groves. The other thing you will need is the radiator and bottom hose and cross over tube as the pump goes right where your current bottom radiator hose is.

These will bolt right on with no mods.
Top
Rvl
Posts: 24
Joined: Tue Oct 14, 2003 9:19 pm

Post by Rvl »

But my truck is petrol with a 18r-j.

Thanks

Robert VanLane
Top
Rvl
Posts: 24
Joined: Tue Oct 14, 2003 9:19 pm

Post by Rvl »

Actually I am hoping to also do crossover steering or at least modify the steering to get better flex.

Thanks

Robert VanLane
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Hey Ruff,
I know you probebly know more about Hilux's but wondering if you know if a 100 series p/steering box will fit a 80 series with little or no mods ?

If not sure, how do you think i could find out ?

Cheers.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I have never looked at a 100 series box sorry.
You would need to look at them and compare the two.
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

Rvl wrote:Actually I am hoping to also do crossover steering or at least modify the steering to get better flex.

Thanks

Robert VanLane


Cross over will need a bit of custom fabbing, you can buy everything that bolts on, besides you will need to mount a IFS steering box to the frame

18R, look around at older cars, celicas etc with 18Rs with factory power steering and remove the pump and all associated bracketry for your motor
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest