Will a GQ rear diff fit in an MQ housing?
Will an MQ centre bolt to a GQ crown wheel and pioion?
I have an AirLocked 4.3 MQ centre but the front diff is goin to be a 60's LandCruiser and they are all 4.1.
Thougths?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ 2 GQ centre Rear
MQ 2 GQ centre Rear
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
1. Yes, but you would need to use H260GQ with H260MQ and H233GQ with H233MQ etc. You may need to modify studs or housing to suit, but in theory it will bolt in the hole, as per below the axles won't work.
2.No, but its possible with some mods including side gears, bearings and so on.
3. The MQ rear diff you most likely have is a H233, 1.26" axle with 31 splines.
Most GQ rear diffs are H233B which have 1.31" axles and 33 splines. (whether disc or drum rear)
Your airlocker is probably a RD04, which with some work could go into the drum brake GQ RD24. But as for cost and benefit and work involved... up to the individual really... its all time/effort factor
Anything can be made into anything and so on..
2.No, but its possible with some mods including side gears, bearings and so on.
3. The MQ rear diff you most likely have is a H233, 1.26" axle with 31 splines.
Most GQ rear diffs are H233B which have 1.31" axles and 33 splines. (whether disc or drum rear)
Your airlocker is probably a RD04, which with some work could go into the drum brake GQ RD24. But as for cost and benefit and work involved... up to the individual really... its all time/effort factor
Anything can be made into anything and so on..
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 3 guests