Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Unimog U1700 - Project Time

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Unimog U1700 - Project Time

Post by patrol42 »

Some of you that atended Tuff Truck this year may have seen us with our 416 Unimog, well not thats complete we have a new project underway..a U1700L

We finished packing up a U1700L (or what was left of it) ready for Transportation from Queensland down to the Shop in Sydney.

Its a shame that the previous owner stripped it, threw away the cab and tray and left it in the state it is in forthe last two years.

We need to get it to Sydney so that we can put a cab on it and get it registered.

One little tidbit of Info that i like about this truck..There are two auxiliary gearboxes available, which allow for high, low and super low. High is 1:1, low is 5.76:1 and super low is 55.87:1 giving crawl ratios lower than 4500:1 Now thats a Crawler Ratio!! :twisted: :armsup:

Some may wonder if we are crazy or bitten off more than we can chew but we like a challenge.

So as you can see we definately have a lot of work to do before its back on the road.

Image

As you can see it has no cab or tray, but luckily pretty much everything else is there including Dash and interior items. The box on the back is the crate we built up on it to hold the parts ready for transport.

Image

This one has the Factory RHD conversion.
Image

Parts Parts Parts..now where do they all go
Image

Image

We actually got the full Mercedes Workshop Service Manuals with it so that will be a big help. .

Thsi Pic should give you an idea of its size..its next to a Landrover
Image

Truck Specifications
Model - U1700L
Type - 435.110
Engine - OM352A 6cyl 5.9 Turbo Diesel
Power - 170HP
Load Capacity - 4950kg
Dead Weight - 5650kg
Gross Weight - 106000
Ground Clearance (under Diff Pumpkin) - 22"
Length - 5.2m
Width - 2.3m
Height - 2.7m
Wheelbase - 3.3m
Last edited by patrol42 on Sat Jun 09, 2007 10:49 am, edited 1 time in total.
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

What is the turning circle like on one of those things ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 6
Joined: Wed May 23, 2007 7:23 pm

Post by Crinale »

haha... looks like fun... goodluck with it
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

love_mud wrote:What is the turning circle like on one of those things ?
The turning radius is 14.1 meters (not much worse than my Patrol really :lol: :lol: )
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

patrol is only 12m i think?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

drop the clutch and it is a bit less :lol:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Re: Unimog U1700 - Project Time

Post by j-top paj »

patrol42 wrote:and super low is 55.87:1

:armsup: :armsup:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

Well the mog made it to Sydney and was offloaded in the street. So last night we had to move it from the street to the shed..which while it looked like a tough job turned out to be easy..

Sadly though..the mog has now been towed by a patrol, winched by a toyota and dragged by a hummer :lol:

Some Pics

Towed by a Patrol
Image

Skulldragging it sideways with a H1
Image

For a perspective on how big it is..this is a sprung over 73 series troopy on 35's (also has 2"lifted springs in it) next to the front bumper of the mog
Image
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

That top photo of the mog next to the landie was taken at the Adamstown army barracks wasn't it??

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

lay80n wrote:That top photo of the mog next to the landie was taken at the Adamstown army barracks wasn't it??

Layto....
Not sure to be honest
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

patrol42 wrote:
lay80n wrote:That top photo of the mog next to the landie was taken at the Adamstown army barracks wasn't it??

Layto....
Not sure to be honest

Had a look at some old photo's, yeah it was taken at Adamstown Army Barracks, just a bit of useless infomation for you :D

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

Well we definately have a cab for it now..I think that the cab has had a longer history than the truck though and needs a lot of TLC

Image

Image

The doors need some work to get rid of the rust, but they are a pretty simple design so it should not be to hard to fixed that up (we hope)

we got a price on a new cab for it and the cab alone is in the vicinity of $65000.00, so we can afford to spend some money tidying this one up ;)
Last edited by patrol42 on Mon Jun 11, 2007 12:56 pm, edited 1 time in total.
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

looking nice :cool:
go the dual cab :armsup:
[color=green]Vote Earth[/color]
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

The first parts are coming back from Cleanup and paint.

These are the rear sway bar links, the beer can is to give you an idea of the size..

Image

The shear size if everything is hard to comprehend and not something we are used to dealing with
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

what sort of $$ do you have in it ot this point ,.... I lust after the 1700 ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

love_mud wrote:what sort of $$ do you have in it at this point ,.... I lust after the 1700 ...
thats a bit of a secret but let just say all up (when its finished) it will be cheaper than a land cruiser
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Is that DoKa cab currently in the UK?

We have a 1300 here at work but the cab has been butchered into a walk through and it's pretty rusty.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

patrol42 wrote:
love_mud wrote:what sort of $$ do you have in it at this point ,.... I lust after the 1700 ...
thats a bit of a secret but let just say all up (when its finished) it will be cheaper than a land cruiser
:shock:

Thats a lot less than I expected .. (I am thinking new\ish 100 series here)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

love_mud wrote:
patrol42 wrote:
love_mud wrote:what sort of $$ do you have in it at this point ,.... I lust after the 1700 ...
thats a bit of a secret but let just say all up (when its finished) it will be cheaper than a land cruiser
:shock:

Thats a lot less than I expected .. (I am thinking new\ish 100 series here)
thats not talking into account our time or the parts which we get at cost..if you count the time..its going to be a whole lot more :lol:
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

yeah I'm VERY interested into this build up :cool:

on another note .... duff beer where did you get that?|
[color=green]Vote Earth[/color]
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

ofr57 wrote:yeah I'm VERY interested into this build up :cool:

on another note .... duff beer where did you get that?|
I have had that for ages..it was made years ago buy a company in South Australia until they got sued by the simpsons and had to recall it all..I was working at a pub at the time so we all took a few cans and drank the rest ;)
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

patrol42 wrote:
love_mud wrote:
patrol42 wrote:
love_mud wrote:what sort of $$ do you have in it at this point ,.... I lust after the 1700 ...
thats a bit of a secret but let just say all up (when its finished) it will be cheaper than a land cruiser
:shock:

That's a lot less than I expected .. (I am thinking new\ish 100 series here)
thats not talking into account our time or the parts which we get at cost..if you count the time..its going to be a whole lot more :lol:
I guessed that was no time kinda number ... often the real killer .. labour costs
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

Well the weather has held us up getting the chassis cleaned up and painted, so it been a slow last week or so.

In the mean time the Rear Calipers and some more sway bar links have been cleaned up and cluttering the lounge room :lol:

More Swaybar Brackets
Image

Rear Swaybar links reassembled
Image

Gear Indicator lights cleaned up and the numbers repainted
Image

Cleaning up the Rear Brake Calipers (the large unit on top of the caliper in this image is the linkage for the Dead-Man brake. It is coated in a rust convertor/sealant which dries clear.
Image

Calipers back together (well one side complete) And again the Duff to give you a size comparison
Image
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

Good thread. That thing is fawking huge!
Will look forward to more updates on the build.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 1780
Joined: Wed Oct 05, 2005 6:43 pm
Location: Toowoomba, QLD

Post by midget_nick »

That will be bloody awesome when it's finnished!
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Cooooooooooooooool.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

love_mud wrote:What is the turning circle like on one of those things ?
It's one of those things, "If you have to ask it'll be too much".

You're lucky to find a dual cab, Back when I was in the Army they only had a couple of Dualcabs, all at Pucka.

In all my time in the army I never saw one of those things bogged.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Every time I have seen/been in a Mog it has ended up stuck. - I've seen about 4 of them in strife.

We used them to support the school Cadet Corps, and the Army used to go to the Wandin Field day here in Vic and drive the test track in them.

They seem to have funny ground pressure- they fall off of even slight cambers once the surface is slick, and if the ground is soft they REALLY sink. Because of the portals, they can sink past the radius of the tyre when they sit on their diffs so they are really hard to recover.

Not bagging Mogs really, It is also a combination of poor tyres, driver skill, tyre pressure etc, but they are far from unstoppable, and can get stopped by stuff that a stock landcruiser etc would drive up and down all day.

With the right tyres, tyre pressure and driver, I'm sure they will do very well.

Just my 2c.

Cool build :cool:

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 279
Joined: Tue Aug 23, 2005 1:36 pm
Location: sydney

Post by patrol42 »

Gwagensteve wrote:Every time I have seen/been in a Mog it has ended up stuck. - I've seen about 4 of them in strife.

We used them to support the school Cadet Corps, and the Army used to go to the Wandin Field day here in Vic and drive the test track in them.

They seem to have funny ground pressure- they fall off of even slight cambers once the surface is slick, and if the ground is soft they REALLY sink. Because of the portals, they can sink past the radius of the tyre when they sit on their diffs so they are really hard to recover.

Not bagging Mogs really, It is also a combination of poor tyres, driver skill, tyre pressure etc, but they are far from unstoppable, and can get stopped by stuff that a stock landcruiser etc would drive up and down all day.

With the right tyres, tyre pressure and driver, I'm sure they will do very well.

Just my 2c.

Cool build :cool:

Steve.
Yes you are quite right, the Mogs used in the Australian army tend to get stuck a fair bit. The main reason for this is pretty much because of the tyres. For soem reason they run standard AT type tyres on them, which are not even the original fitment on the mogs.

It also comes down to the driver as well..in many ways you let the mog find its own way through difficult sections rather than trying to 'Drive'it through

I would put money on either the 1700 or my 404 going places that you would not be able to take even a modified vehicle through let alone a stock vehicle

have a look at this video and tell me that a stock cruiser would make it..lol

http://unimogvideos.com/main.php?g2_itemId=225

Admittably the mog had a hard time, but then most 4x4's would let alone one with a crane etc on the back./
Go Portal!
[url=http://www.tractivforce.com]TractivForce[/url]
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 2 guests