Hi guys
need some info. im after some egine mounts.
probaly lhs rhs and the trans mounts.
i need to know where to buy and a averge cost you guys have paid.
CHeers thanks again.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine mounts where to buy.
engine mounts where to buy.
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Re: engine mounts where to buy.
Its normally only the side passanger engine mounting rubber that fails.vicelore wrote:Hi guys
need some info. im after some egine mounts.
probaly lhs rhs and the trans mounts.
i need to know where to buy and a averge cost you guys have paid.
CHeers thanks again.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..
They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie
They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
love_mud wrote:Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..
They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie
5.2L = 318ci - Fireball oh yeah!!
Valiant wagons and sedans maybe Guy?
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
From memory it was something like that .. if anyone elese used to subscribe to the old "topica" Zuk list it was origionally posted up by crow horse.lay80n wrote:love_mud wrote:Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..
They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie
5.2L = 318ci - Fireball oh yeah!!
Valiant wagons and sedans maybe Guy?
Layto....
With a little searching I have found that roadless gear sell em as "forever motor mounts" http://www.roadlessgear.com/page/RGL/PROD/E/RG241
but does not say what they are actually for ... it is driving me crazy now trying to remember .... I know that it was for a 318 though
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Yep just did a quick search on zuwharrie and YES the mounts are offset and are used to lower the motor.
Not sure where to buy them but I spose you could go to your local parts place and ask to look at there book. Tell them what you are after they should be able to help. Ive nearly talked myself into doing this
Nik
Not sure where to buy them but I spose you could go to your local parts place and ask to look at there book. Tell them what you are after they should be able to help. Ive nearly talked myself into doing this
Nik
Re: engine mounts where to buy.
I can get Sierra replacement mounts for $23.00e. Hope that gives a guide to your question!vicelore wrote:Hi guys
need some info. im after some egine mounts.
probaly lhs rhs and the trans mounts.
i need to know where to buy and a averge cost you guys have paid.
CHeers thanks again.
http://stores.shop.ebay.com.au/4wd-products
Re: engine mounts where to buy.
And finally someone answers the actual questionPodge wrote:I can get Sierra replacement mounts for $23.00e. Hope that gives a guide to your question!vicelore wrote:Hi guys
need some info. im after some egine mounts.
probaly lhs rhs and the trans mounts.
i need to know where to buy and a averge cost you guys have paid.
CHeers thanks again.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
thanks for the replys guys. on my way home last night stoped by auto barn. they said they could get them in for me overngiht. all 3 mounts where 31$ each or seomthing. a little more than 23$ podge but oh well.
Cheers guys
Cheers guys
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Who is online
Users browsing this forum: No registered users and 2 guests