Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HZ noise

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 57
Joined: Wed Dec 14, 2005 8:57 pm
Location: shoalhaven nsw

1HZ noise

Post by T-rex »

I have just bought a 80s with the 1HZ and it's got 380000km on the clock and was wondering how noisey are these motors normally. as mine makes a rattling noise around 2000rpm, i know most old diesels make this noise but would like to know were it comes from. tapets, injector pump,or injectors. apart from the noise the motor runs sweet. and when the motor is under load it isn't as noticable.

Just one more thing, having trouble changing gears in the morning. mainly second and third, just had the gear box rebuilt, new bearings and synchros, not sure wat the problem is cos once it warms up it goes fine.Oil i have should be fine according to the manual, any suggestions or ideas would be appreciated.

Thanks ,

Troy
Posts: 114
Joined: Mon Feb 12, 2007 8:55 pm
Location: Sunny Coast

1hz

Post by Gazza the Chippy »

Hey mate, I've a 1hz aswell, 201kms, same noise between 1800 and 2200rpm. Just had tappets adjustad, did squat :x Apparently they all make this noise sooner or later depending on the flogging, but dosent seem to affect them too much so I've beeen told. Gazza!
Gazza the Chippy
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

They tend to have rattle from gearbox input bearing, does the engine appear quieter idling with your foot on the clutch more than off in neutral?

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

mate i bought an 80 340,000kms on it last yr.
made a weird rattling sound.
i heard it could be big end bearings and tappets...

in the end....

it was a sheared off bolt in the alternator bracket.

so it can be hard to tell where the noise is from sometimes???
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 210
Joined: Sat Jan 06, 2007 11:21 pm
Location: Bunyip Victoria.

Post by goannaoffroad »

1HZ's can develop a rattle in the timing gears when they have a few K's on them due to the teeth being worn this is noticeable at the rev's you mention are you running 15w40 diesel oil or 20w50 sometimes a thicker oil or a quality oil additive will help .
As for the gear shifting if your running 80w90 gear oil in the box it WILL be hard to shift when its cold if the box is tight from being re coed, these box's have some issue's I've started using straight 80w trans oil in them seems to fix a few problems ,the 1st 2nd synchro drum in these box's is a big heavy unit that thumps ,bangs and rattles when the box is in neutral and can be the cause of some unidentified noises too.
None of the things I've mentioned are death sentences for these vehicles there more annoying than anything and I hope my long winded reply maybe of some help .
Cheers.
Goanna Off Road, Out the back in the shed.
Posts: 62
Joined: Sun Aug 21, 2005 6:56 pm

Post by dogoff »

Use 75/90 gear oil in your box
Years ago Toyota replaced some crankshafts for a noise at around 2000rpms, sometimes they were fixed, some were not. If it was a problem these motors would be blowing up everywhere, but they are not.
Post Reply

Who is online

Users browsing this forum: No registered users and 138 guests