Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch gone need help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 61
Joined: Mon Dec 04, 2006 11:03 am
Location: melbourne, vic

clutch gone need help

Post by kurzo »

i was out in the mud and found that my car wouldn't move anymore, when i was under high rev's it will start to move but with a clutch burning smell was wondering what it would be or is my clutch stuffed if so what the best clutch kit to put in a 4.2 pet lwb mav
cars with alloy bullbars should be shot to the sun.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Was you bellhousing submerged for any time?

could jsut be that theres water and mud in your bell housing which is making your clutch slip
Top
Posts: 61
Joined: Mon Dec 04, 2006 11:03 am
Location: melbourne, vic

Post by kurzo »

it was in some sloppy mud for a little ive sprayed it a little but it only helped that little bit
cars with alloy bullbars should be shot to the sun.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

kurzo wrote:it was in some sloppy mud for a little ive sprayed it a little but it only helped that little bit
I would try to soak the bellhousing out as much as you can with water

Does your bell have an inspection cover?

get the hose in there, but you dont want to pressurise the bellhousing, could lead to rear main failure i would think.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

clean it out with fresh water and wait for it to dry ;)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

j-top paj wrote:clean it out with fresh water and wait for it to dry ;)
If it's not already shagged
plenty of parts on the bench
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests