Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff choice-ideas people

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Diff choice-ideas people

Post by bru21 »

Without giving too much away, I need some diffs to suit my new project.

Looking at bundera but would prefer something with disk brake rear. And fresher as they need to support in excess of 300hp in a 1400kg truck. Also i do not want to go too wide. will be running max 35's on max 8" wide rims. pref toyota 6 stud pattern.

may consider IFS if i can get a reasonably strong one,

Do any prado's have live axle fronts?

Approximate $ for prado's

width disc to disc?

Ideas as i have never looked at smaller trucks eg navara, pathfinder, pajero etc etc

I do not want gq/ gu etc too heavy.

Hilux / longfields etc look like the go so far.

cheers all bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

um as for the smaller trucks the pajeros 3.5v6 models r the strongest allmost nisan strength. the mitsu guys tell me. the nj through to nl
the ifs front is fairly robust too. stronger than prado.
and they got coils.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Do you consider 80series stuff too heavy?

If so could go the rangie axles with bundera centres and longs option like many (rover) people have. Bit more $$ and a couple of custom shafts, but light and with discs at each corner.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

Front: high pinnion D30 with a super 30 air locker) out of a XJ cherokee with upgraded shafts should give you enough strength on a low wt. vehicle and you'll have great pumpkin clearance. you're 35's will be like GQ's on 38s

Rear, D44 with upgraded axles.

again good diff clearance and enough strength for a light wt. vehicle



Plenty of ratos around for these diffs too.
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

hmmmm bru for dana diffs contact jimmy b from here.

im sure he still has his built axles there.. was a great price too..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Contact:
Contact Mad Cruiser

Post by Mad Cruiser »

Everyone knows what your project is .....

You already it in forsale section :roll:
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

60 series with longfields
little bit wider then hilux and the centre is heeps stronger.
or if they are to wide go 40 series with longs.

27 spline chromo longs will only set you back $650 for a pair or 30 spliners are a tad over 1g.
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Guts wrote:60 series with longfields
little bit wider then hilux and the centre is heeps stronger.
or if they are to wide go 40 series with longs.

27 spline chromo longs will only set you back $650 for a pair or 30 spliners are a tad over 1g.
x2
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Mad Cruiser wrote:Everyone knows what your project is .....

You already it in forsale section :roll:
lol, along with the suzuki section etc. its a jimny based obc ONLY conder.

what i ment is the details like motor, hp, linkage styles etc.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest