Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how do i get a 1hz sump unstuck?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 115
Joined: Fri Apr 22, 2005 8:38 pm

how do i get a 1hz sump unstuck?

Post by 4runner2.8 »

hi iv been trying to get the sump off my 1hz for the last 2 hours without damaging it. any tips on how to get it unstuck?

it just seems to be stuck there really good.
Top
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

bigger hammar?
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

persistence bro
Top
Posts: 33
Joined: Tue May 22, 2007 6:11 am
Location: Perth, Scotland.

Post by Graham Stirling »

Wedge, chisel and stanley knife and patience works for me. G
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Paint scraper tap it in about and 1"/25mm with a hammer and then tap it all the way round. Can be difficult to do in the car but can be done quite easy on and engine stand.

Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 115
Joined: Fri Apr 22, 2005 8:38 pm

Post by 4runner2.8 »

Wally is the man

the method and it was off in 10 min and it was in the car. thanks heaps for the tip.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests