Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Scangauge
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Ugly Dave Gray aka Dave ButtlerKiwiBacon wrote:Who?droopypete wrote:Is that the nasal delivery one that Dave Gray is promoting?
Peter.
The David Gray on this side of the tasman was a mass-murderer.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Never heard of him (thankfully).MKPatrolGuy wrote:KiwiBacon wrote:Who?droopypete wrote:Is that the nasal delivery one that Dave Gray is promoting?
Peter.
The David Gray on this side of the tasman was a mass-murderer.
http://www.scangauge.com/
I use one on my Jeep - it allows you to read and reset the "check engine" codes and on the odd occasion that it's running trouble free, you can use the guage to provide 4 simulataneous readings from the computer while driving.... everything from a recalibrated speedo reading to voltage to throttle position sensor readings, litres of fuel being used per hour, etc.
You can set the readings for metric or imperial and can set it up to do stuff like distance to empty that are built into a lot of factory computers these days.
One of the nice features that has been of use is that any time the engine throws a code, it records the readings of each of the data feeds that it can display to help with narrowing down exactly what is causing the issues.
Not sure who else stocks them but I got mine through Wooders at: www.wooders.com.au
You can set the readings for metric or imperial and can set it up to do stuff like distance to empty that are built into a lot of factory computers these days.
One of the nice features that has been of use is that any time the engine throws a code, it records the readings of each of the data feeds that it can display to help with narrowing down exactly what is causing the issues.
Not sure who else stocks them but I got mine through Wooders at: www.wooders.com.au
I'm not very good looking, so I guess I better be useful . . .
I've just ordered one from Wooders (the Aussie distributor). Their price is better than I could get buying one from the US.Butt Craic wrote: Not sure who else stocks them but I got mine through Wooders at: www.wooders.com.au
Who is online
Users browsing this forum: No registered users and 137 guests