Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine capa limits.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 224
Joined: Tue Aug 12, 2003 6:33 pm
Location: Sunshine Coast

Engine capa limits.

Post by heathgu »

Can anyone tell me or know of someone to speak with about engine capacity limits regarding qld. Is it a percentage thing.

I want to know can i build a stroker roughly 6.6-7.0litre and turbo it. put it in my Gu patrol ute.

Cheers Heath.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

according to the ratio I looked at a few years ago for Qld transport maximum displacment for a gq coil cab would be 9.8l forced indution or 12l n/a. this is due to the factory kerb weight and full chassis it would be higher in a wagon but I'd check with Qld transport first
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

nastytroll wrote:according to the ratio I looked at a few years ago for Qld transport maximum displacment for a gq coil cab would be 9.8l forced indution or 12l n/a. this is due to the factory kerb weight and full chassis it would be higher in a wagon but I'd check with Qld transport first
12lt might be abit to much for the engine bay. The firewall is going to be massaged. ;)
THOUGHT FOR THE DAY....
Top
Posts: 9
Joined: Thu Nov 10, 2005 12:32 pm
Location: REDCLIFFE

Post by TT80 »

I checked recently. You need to get the kerbweight from nissan for your model. Multiply it by .333 eg 2400 kg x.333= 799 cubic inches natrally aspirated. Places that do mod plates should have this info on file


TT80
Top
Posts: 676
Joined: Sat Jul 23, 2005 6:03 pm
Location: Maroochydore

Post by cutzook »

TT80 wrote:I checked recently. You need to get the kerbweight from nissan for your model. Multiply it by .333 eg 2400 kg x.333= 799 cubic inches natrally aspirated. Places that do mod plates should have this info on file


TT80

spot on TT80.
mmmm, sounds good heath, will have to drop around and have a geez when its under way, and a beer or 20. :D


joel
http://www.fourbys.com.au/
Top
Posts: 166
Joined: Wed Apr 27, 2005 9:36 pm
Location: Gold Coast

Post by scout392 »

I was told when I put the 392ci in (345ci stock) they only allow a 20% power increase.??

Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 137 guests