Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Squeaking clutch?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Squeaking clutch?

Post by murcod »

I seem to recall other people having this issue but searching didn't turn up much?

When I push the clutch pedal in I get a very loud (and annoying ) squeaking noise. It sounds like it's coming from the clutch mechanism under the vehicle. It's definitely not from the pedal or anything inside.

It has been happening since I had my clutch replaced and gearbox rebuilt. Has anyone got any ideas on what to attack before I go berserk with the silicone spray on the cable and clutch arm?
David
Posts: 238
Joined: Wed Apr 27, 2005 12:11 am
Location: Oz

Post by senergy »

I have a similar noise. It has been like that for 2 years so far. I think it is the push out bearing.
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

So if you have the noise, and the clutch seems really hard to push in sometimes, what might that be?
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Seems like a bit of a mystery noise then?!

I sprayed a bit of silicone spray around the arm and lubricated the cable to arm bit. That quietened it for a very short period.

I'm thinking about spraying onto the section where the clutch arm enters the bellhousing. From the pics in another thread that shouldn't cause a problem with contaminating the clutch friction material, I'll just let it run down the arm into the bellhousing. The problem is getting access into that area. :bad-words:
David
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests