Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

landcrusier PTO winch

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

landcrusier PTO winch

Post by Nat84 »

hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: landcrusier PTO winch

Post by dogbreath_48 »

Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat
The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu :)
Tetanus rolling on 37's
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Re: landcrusier PTO winch

Post by Nat84 »

dogbreath_48 wrote:
Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat
The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu :)
so it want fit a 4speed?
what is a split transfer IIRC?
how different are the driveshafts between 40/60/70.?
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: landcrusier PTO winch

Post by dogbreath_48 »

Nat84 wrote:
dogbreath_48 wrote:
Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat
The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu :)
so it want fit a 4speed?
what is a split transfer IIRC?
how different are the driveshafts between 40/60/70.?
IIRC - If I Recall Correctly

I'm not sure which transfer case the 4-speeds use - they may well be the same.

As far as i know the 60 series used a two piece driveshaft, wheras the 40 used a three piece. I'm not sure on the 70 but from what i can tell it would need a three piece too.

-Stu :)
Tetanus rolling on 37's
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

if the pto winch comes with a bracket/brace measure it to make sure it'll fit between your chassis rails..

a mate got one for his 60 off a 60 (so he was told) and found the winch and his chassis rails didnt line up..
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests