Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How The Hell Do You Take The Doors Off A Zook?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

How The Hell Do You Take The Doors Off A Zook?

Post by JacZook »

How The Hell Do You Take The Doors Off A Zook?

I Have tryed everything, Air Rachets, Socket with Phill Head on it.

The hinges just wont come off

Please help

Cheers
Posts: 67
Joined: Tue Jun 22, 2004 8:12 pm
Location: Where ever I want to be

Post by cazook »

Try a impact driver
The only true wilderness is between a greenies ears
IN Australia we eat meat, drink beer & we speek f@#%&*^g english
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Never done it myself, but have you tried an impact driver?

I assume you meen the screws on the hinges. One end of the hinge is welded to the body I think, so only one way to remove them as such.
Wheeling on completely wicked angles, without even looking stable.
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

There a prick! :bad-words:

Broke 1 impact driver and got them all out except for one i had to grind off! :twisted:
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

centre punch near inner edge , punch it once straight then angle it and turn the screw head by hiiting punch , this has worked every single time on many zuk's , Cheers paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

once removed i would suggest replacing the screws with bolts or allen key head bolts.. something other than a screw head!
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

use a chisle and unscrew it with the chisle works all the time
Posts: 363
Joined: Mon Aug 21, 2006 3:04 pm
Location: On the loud pedal

Post by sanger »

Impact driver and a BFG.
Chisel
or small flame torch head head and unscrew
Hardcore Wheelin' www.ozwheelers.net
- 94 Zuki - Lux diffs, SPOA, twin locked, 35's, 1.5" wheel spacers, exo, series 4 rockhoppers
Posts: 266
Joined: Sun Jul 13, 2003 7:56 pm
Location: Gold Coast

Post by Bazooka »

Used an impact driver bit in an 8mm socket and ratchet. Gives a lot more leverage and has never missed. Have always been able to get any door screws out this way.
Posts: 75
Joined: Sat Apr 21, 2007 1:47 pm
Location: Richmond, nsw

doors off zook

Post by want to be a wylie »

use ur impact driver but tighten the screws to break the factory locktight first then undo them.
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

i have done this heaps and with a impact driver worked for some until it broke or a cold chisel works to.. if all else fails weld a nut to it then undo it.
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

Get an air hacksaw and cut the top arm off each hinge, so that when you open the door, they will just lift off, if the straps are undone. That is what I did to mine.
Took 2 seconds to remove doors when I wanted to. And 2 seconds to get them back on.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

needs heat and/or impact to break the factory thread glue

no matter what, you will destroy the stock screws so go sick
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

door screws

Post by want33s »

Forget about an impact driver.. You will only smash bits and dent panels.
Get a hammer and a good cold chisel. Works for me. NO damage to paint on doors, body or hinges, however screws will need replacing. Use Nevaseeze on new screws. Stainless buttonhead capscrews are the go. :D Image
Last edited by want33s on Tue Jun 12, 2007 11:52 pm, edited 1 time in total.
Posts: 821
Joined: Mon Aug 14, 2006 8:37 pm
Location: redland bay

Post by offroader-rama »

impact driver
every suzuki owner needs one, there screews are so bloody tight, they work everytime.






how did you go buy the way
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I have also found the impact driver to push the panel in rather then undo the screw - especially on the top screw of the top hinge.

I have used a cold chisel for ages, neve had one beat me.

The quickest way is an air chisel with a screwdriver attachment. Bluepoint (Snap-on) do these and while the air chisel is shocking the screw you just turn the lever and viola! - any screw is undone!

PS I have had a car at home with cut hinges and they make me nervous. They are quick (but so is undoing 8 screws) but aren't as secure.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 274
Joined: Thu Apr 06, 2006 8:37 pm
Location: Geraldton, WA

Post by Longbaser »

Yeh, the ultimate challenge in rebuilding a Zook!

I went through this after getting a good pair of doors to replace my rusted out ones a few months ago. After shattering several impact driver bits, and having seen the damage a cold chisel can do if it slips at the critical moment, I dug out my old set of Eazi-Outs.

Drilled a small hole in dead centre of the Philips head slots (can't remember now what size drill bit I used, or what size Eazi-Out!) and they all came undone with relative ease. If you are careful, the screws can be re-used, though I had to replace a few that I had savaged with the impact driver.

Incidentally, I do like Want33's idea of the stainless buttonhead capscrews to replace the original crappy screws! :armsup:

Cheers - Longbaser.
An economist is an expert who will know tomorrow why the things he predicted yesterday didn't happen today. ― Laurence J. Peter
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Gwagensteve wrote:
I have had a car at home with cut hinges and they make me nervous.
Steve.
Why so Steve, the doors are about as tough as a coke can anyway.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Hmmm, after buying hundreds of stainless caps for flare mounting etc, I am not really a fan. Button heads are shallower than normal cap heads and I have had heaps of trouble with them galling and the hex burring.

They might be ok for door mounting because they don't require much torque and are unlikely to get much imapct damage, but once the stock screws have had their locktite broken they seem the best option to me.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Image
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Much nicer to work with than button heads but less bling.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Re: door screws

Post by suzuki boy »

want33s wrote:Forget about an impact driver.. You will only smash bits and dent panels.
Get a hammer and a good cold chisel. Works for me. NO damage to paint on doors, body or hinges, however screws will need replacing. Use Nevaseeze on new screws. Stainless buttonhead capscrews are the go. :D Image
Those doors look familia!

They came up very well!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

After you do get the mongrals out it doesnt what bolts you use if you dont put a little anti-seave grease on it
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Re: door screws

Post by want33s »

suzuki boy wrote:
Those doors look familia!

They came up very well!
Yep, I like them. Thanks Nath. Bit cold to use them at the moment, will have to wait another few months. :cry:
Posts: 25
Joined: Sat Jul 16, 2005 11:12 am
Location: Roxboro, NC USA

Post by BlueRidgeRunner »

If all else fails then knock the paint off the head of the screw and weld a nut to the top of the screw. Then use a wrench that fits the nut. I had to do that to get the screws off a couple of my hinges.

Here is a permanent fix:

http://www.izook.com/tech/samurai/doors ... ngecut.htm
[url=http://bbs.zuwharrie.com]Zuwharrie.com America's Largest Suzuki 4x4 Message Board[/url]

[img]http://i21.photobucket.com/albums/b285/flatriveroffroad/Smileys/Adventurer-05sCustom.jpg[/img]
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

love_mud wrote:
Gwagensteve wrote:
I have had a car at home with cut hinges and they make me nervous.
Steve.
Why so Steve, the doors are about as tough as a coke can anyway.
Dunno - just makes me nervous. halves the strength of the hinge, and I don't like that the door is not properly retained.

If their was a quick release pin or some form of positive retention so the door couldn't lift off without another step being taken like a pin pulled or something I would be happy.


I know it doesn't make much sense when I am happy to drive with no doors, but with no doors you know exactly where you stand.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests