Hey im new to this site and only a young cobber and want to lift my hilux 2 inches and lift my body 2 inchs.
What sort of cost am i looking at..? so that the car will flex.
what type of money would i b looking at thanks daniel.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HILUX 2 door tray lift cost...?
Moderators: toaddog, Elmo, DUDELUX
for spring lift price around got a mates through
http://www.superiorengineering.com.au/p ... category=3
and he's good to deal with.
http://www.superiorengineering.com.au/p ... category=3
and he's good to deal with.
plenty of parts on the bench
He will freight stuff but it will cost more try
EFS
http://www.extreme4x4.com.au/dealerlocations.htm
For oldman emu suspension, think these are the springs i used when i did Rears Up Front(RUF) on mine
http://arb.com.au/contact-arb-australia.php
Also you could try say repco and see what they can get through Kings springs and just ask around sorry bout short message first up i looked at time and it was time to go to work All most late
EFS
http://www.extreme4x4.com.au/dealerlocations.htm
For oldman emu suspension, think these are the springs i used when i did Rears Up Front(RUF) on mine
http://arb.com.au/contact-arb-australia.php
Also you could try say repco and see what they can get through Kings springs and just ask around sorry bout short message first up i looked at time and it was time to go to work All most late
plenty of parts on the bench
My rear springs are a custom made job front are old 2in lifted rears which also makes the diff 50mm foward so 35's fit well but you need shorter steering arm and torque rod or Histeer/Xover steeing look through mebers thread at maine and others with luxes and send some PM's also for fitting the 35's Do a search in this section and there will be more usefull info, by the way a mate runs EFS springs in his lux and there ok just had to get a Warranty on drivers front leaf pack but that common
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 0 guests