Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cracked Axle Housing

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 7
Joined: Mon Nov 13, 2006 9:31 pm
Location: Brisbane, QLD Australia

Cracked Axle Housing

Post by Big Blue »

Hey guys

I need a bit of feedback. I have an 89 NG with a coil rear end. I have cracked the weld that runs around the axle housing about half way between the diff and the wheel. I had it welded up once, but I think the diff oil has contaminated the steel and the welding is less than sucessful. I've also been told that any welding at all can get the whole houseing out of alignment leadng to other problems down range.

i'm looking at tearing down the whole rear end and replacing the buggered housing. I need to do bushes and rubbers anyway.

My question is; Is cracking of the axle housing a typical problem with this model? I admit I tend to have problems keeping all the wheels on the ground, but I wouldn't call my driving "extreme".

I can get the existing housing braced and aligned for about $400 or can search for a stock replacement from a wrecker. If it is a common problem perhaps I should spend the bucks getting it braced.

Any advice would be welcome.
Posts: 110
Joined: Sun Jul 02, 2006 11:53 am
Location: aus/qld/brisbane/bray park

Post by sjjenkin »

sombodys been dune jumping :roll: na i dident and it still broke. did it happen in the same place as my nf pajero coil rear?
Image

i got a replacment housing from the reckers ($150) changed over the axels drums and put new diff seals in wasent that hard but if its started to leak diff oil like mine did (took 2 years to do this tho) and i 4x4 lots and it broke on the bitchmen would hate to think what would have happend if it did it 4x4ing :shock:

but i wouldent pay the money to get it fixed and straitend because it will probably do it agin just laminate it yorself with small beds so as not to get to hot this is what im yet to do and its fine
ImageImage
you should only be stuck if your on ur roof

eat some concrete and harden the hell up
Posts: 167
Joined: Wed Jul 21, 2004 10:23 pm
Location: Tassie

Post by GREGGO »

My NH cracked in the same place but horizontally. I took it to a mate who is a prof welder and like SJ said, a nice row of short welds to hold it together, and a couple of runs to seal it up. It's been 4 to 5 years since it's been done and no leaks. If you do it yourself, just don't let it get too hot. Have a break between the short welds and the bigger runs.


Greggo
Shorty Gen2, lots of stuff and more to come!
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

GREGGO wrote:My NH cracked in the same place but horizontally. I took it to a mate who is a prof welder and like SJ said, a nice row of short welds to hold it together, and a couple of runs to seal it up. It's been 4 to 5 years since it's been done and no leaks. If you do it yourself, just don't let it get too hot. Have a break between the short welds and the bigger runs.


Greggo
yup same here ... a good tig welder does wonders mind u it split in a different place later ... a weak spot in the paj
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Posts: 7
Joined: Mon Nov 13, 2006 9:31 pm
Location: Brisbane, QLD Australia

Post by Big Blue »

Thanks guys.

I have had it welded up again by a guy with suitable talent, but as this is the second time I just don't trust it.

I'm looking for a wrecked replacement presently. Looks like more time under it rather than in it again.

cheers
Posts: 24
Joined: Mon Sep 11, 2006 8:52 pm
Location: Kilcoy

Post by pajo money box »

I had a NJ that did it and just out of waranty after discussion with Mitsubishi Aust no problems replaced it no quoestions ask.Can't rememder his name but guy from ARB Capalaba used to do a mod and strenghten them
NH Shorty supercharger detroit locker front,factory locker rear,body lift & suspension lift,winch mtr's ironman suspension
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests