Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fish oil

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

Fish oil

Post by workmonday »

Just bought a ute and the previous owner has covered the engine bay in spray on fish oil, while it has preserved the bay is there any easy way to get it off easily. Degreaser didnt work... Hope someone can help, Cheers
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Whats the problem does it smell. If not leave it there.

otherwise a rag and some elbow grease may be an option.

Cheers
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

Try Sard wonder soap laundry precleaner spray and a bit of water with a brush.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 90
Joined: Tue Oct 10, 2006 2:18 pm
Location: Brizvegas

Post by Mechz »

Just remember that soaps are full of salt and shit that like to make things rust. I'd be leaving it there unless you want it to be a show car or something.
92' NH Pajero SWB 3.0 V6
Top
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

fish oil

Post by workmonday »

Looks like its staying there, thanks for the advice, Its worked extremely well. Penetrene and a scotch brite did the trick though it can stay there. Cheers
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

It will give your truck it's Omega 3 fatty acids and help reduce it's cholesterol ;)
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

fish oil

Post by workmonday »

pisser, so it wont be so fat and it will puff less going up hills..
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

thinners on a rag getts it off easy
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 2
Joined: Mon Jun 18, 2007 7:02 pm

Post by criac »

I had a mate had the same drama. He said that a Gernie that has a high temperature setting (almost 100 degrees) works, go high pressure too.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest