Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

feroza standard height?????

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 18
Joined: Wed Jun 13, 2007 5:57 pm
Location: brissie

feroza standard height?????

Post by ooh304 »

hey i just brought a 92 roza it looks lifted a bit so could you tell me what the standard height is??
thanks
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Download the "Service Manual" in the FAQ section and it gives measurements for the height of the front suspension. ;)
David
Posts: 18
Joined: Wed Jun 13, 2007 5:57 pm
Location: brissie

Post by ooh304 »

good one thanks mate.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Another way to tell is to check the front arms/ bumpstops - they should be sitting around 1/2 way between the stop blocks on the chassis. Also check the bump stops haven't been "cut down" on the front.

From memory the stock rear leaves on mine were 4 + 1 overload? Yours should be the same. They will most likely be sitting almost straight with no load and should have teflon / plastic spacers between the leafs at the ends (most aftermarket springs don't.)
David
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests