Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

different pinion flanges

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

different pinion flanges

Post by DR Frankenstine »

I removed an LSD out of the rear a 1986 sahara 60 and bolted back in a front diff centre out of a std 1985 60 no problems. Today I put the LSD into the rear of my 1985 60 and the tailshaft wouldn't bolt up, I had to re-drill the holes in the flange. I thought all the cruiser diff centres were the same from the 40 series up to the 75 series. I guess I thought wrong. :lol:
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

im pritty sure the pinion splines the same...

so you could have just put the old pinion flange back on...
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

right about that time, the 62 came out with the 3f/61 12ht, and toyota did away with the d.c front shaft by twisting the transfer down 7 degrees....and different flanges on diffs...they are all interchangeable thou...
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

yeah they changed pinion flanges with regular abandon, you can buy circular ones with 8 holes in them
hands and mums dont count!!!
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

pinion

Post by DR Frankenstine »

dow50r wrote:right about that time, the 62 came out with the 3f/61 12ht, and toyota did away with the d.c front shaft by twisting the transfer down 7 degrees....and different flanges on diffs...they are all interchangeable thou...
Ok.. Mine has the d.c front shaft the sahara didn't and the donor front diff didn't either.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests