thanks in advance for any advice or help..cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3" leaf lift???
3" leaf lift???
hi guys just wondering if anyone in aust is/has used the trail gear 3" leaf lift?
thanks in advance for any advice or help..cheers
thanks in advance for any advice or help..cheers
I wouldn't buy a 3 inch leaf lift of any brand. as a general rule the greater the arch the stiffer the spring becomes. you sacrifice droop and up travel. Im very Happey with my OME 40mm lifted springs. with 35mm extended shackles and a bit of hammering I clear 31" tyres. If you need to clear larger tyres then that, go for a body lift. I have a LWB and chassis clearance is not a problem. If you want taller springs to flex you need to buy something longer, ie jeep springs and custom move you spring chassis mounts to make them fit. Lots of work and only someone with a bit of skill can do a good job.
[url]http://www.vic.suzuki4wd.com/forum[/url]
OME springs don't cost much at all to buy per corner. I'd be surprised if you had to spend more than 500 just for springs using your original Ubolts, shackles, shocks, but get new bushes i guess. that leaves 1000 for gears...
trail gear 6.5s from www.lowrangeoffroad.com are only 475 US or Trail Tough 4.9s for around the same price (US$535) plus around 100 US postage to east AUS....
so AU $1095 all up....that leaves 405 for a lockrite locker..... US 199 + US 70ish postage....how bout 2 lockers or 2inch BL US $109 and you'll still be under 1500 
But remember to get your mates to buy some things as if you ship more than $1000 AUS into the country you'll gett slugged import duty so give your mates the money and get them to buy some bits for you to share out the load....
trail gear 6.5s from www.lowrangeoffroad.com are only 475 US or Trail Tough 4.9s for around the same price (US$535) plus around 100 US postage to east AUS....
so AU $1095 all up....that leaves 405 for a lockrite locker..... US 199 + US 70ish postage....how bout 2 lockers or 2inch BL US $109 and you'll still be under 1500
But remember to get your mates to buy some things as if you ship more than $1000 AUS into the country you'll gett slugged import duty so give your mates the money and get them to buy some bits for you to share out the load....
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
no worries!.....ring up escape offroad in blackburn. I did heaps of homework and got a full OME Kit for 1000 fitted...it was 750 for OME dakar 2inch lifted springs, shocks and bushes...
try ARB Brighton as well. There name seems to pop up on this board a bit as well. I'd try at least four or five different places. If you can fit them yourself even better. I can fit my own springs now but back then wasn't confident enough hence the extra fitting cost...
try ARB Brighton as well. There name seems to pop up on this board a bit as well. I'd try at least four or five different places. If you can fit them yourself even better. I can fit my own springs now but back then wasn't confident enough hence the extra fitting cost...
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
You are missing part of the point.
Spring lift does not allow you to fit a bigger tyre. Even if the tyres clear with the car on level ground, when you flex the car up on an obstacle the tyre can still move up as far as it could before so the tyres will still hit.
A 2" BL means that wherever the suspension is, you still have 2" more room for the tyre to fit.
It is also possible to space your bumpstops down to increase tyre clearance (and this allows the fitment of longer shocks, the only way to increase wheel travel)
Tall spring lifts tend to make sierras behave badly. to hold a high arch the spring rate has to be quite high so the car rides badly and doesn't flex.
A 2" body lift will almost clear 32's by itself.
PS I don't really recommend resetting stock springs. The ride will be poor and the cost will be about 1/2 of good quality springs like OME Dakar.
Steve.
Spring lift does not allow you to fit a bigger tyre. Even if the tyres clear with the car on level ground, when you flex the car up on an obstacle the tyre can still move up as far as it could before so the tyres will still hit.
A 2" BL means that wherever the suspension is, you still have 2" more room for the tyre to fit.
It is also possible to space your bumpstops down to increase tyre clearance (and this allows the fitment of longer shocks, the only way to increase wheel travel)
Tall spring lifts tend to make sierras behave badly. to hold a high arch the spring rate has to be quite high so the car rides badly and doesn't flex.
A 2" body lift will almost clear 32's by itself.
PS I don't really recommend resetting stock springs. The ride will be poor and the cost will be about 1/2 of good quality springs like OME Dakar.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Thre was a thread on here a couple of months ago someone also asking about 3" springs. The general concensus (spelling?) was that they will be a rigid a steel girder.
I don't see the point in changing to lifted springs and using your old shocks, your spring travel will be messed up to buggery. Pay the bit extra and get matching long travel shocks.
Also a little extra (its been anoying me for a while): Got some custom u-bolts made by a well known spring place for a non-suspension application; when talking about suspension lifts, he said he doesn't see the point in lifting something as light as a sierra, as it will either sag the light springs, or they will be too rigid and won't flex; he had the nerve to proceed to say if you want lift, buy a Cruiser or Patrol! WHAT A TOOL!
There is some truth to what he is saying, but I think he was just a lazy salesman, check out some footage of some Sierras, a quality suspension setup will work well, and you can get quite good flex for a budget leaf sprung vehicle.
Summarising my thoughts, don't go bigger than the (seemingly normal) 2" (~50mm) spring lift. And get the good shocks to match whatever springs you do get.
I don't see the point in changing to lifted springs and using your old shocks, your spring travel will be messed up to buggery. Pay the bit extra and get matching long travel shocks.
Also a little extra (its been anoying me for a while): Got some custom u-bolts made by a well known spring place for a non-suspension application; when talking about suspension lifts, he said he doesn't see the point in lifting something as light as a sierra, as it will either sag the light springs, or they will be too rigid and won't flex; he had the nerve to proceed to say if you want lift, buy a Cruiser or Patrol! WHAT A TOOL!
There is some truth to what he is saying, but I think he was just a lazy salesman, check out some footage of some Sierras, a quality suspension setup will work well, and you can get quite good flex for a budget leaf sprung vehicle.
Summarising my thoughts, don't go bigger than the (seemingly normal) 2" (~50mm) spring lift. And get the good shocks to match whatever springs you do get.
Wheeling on completely wicked angles, without even looking stable.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Gwagensteve wrote:You are missing part of the point.
Spring lift does not allow you to fit a bigger tyre. Even if the tyres clear with the car on level ground, when you flex the car up on an obstacle the tyre can still move up as far as it could before so the tyres will still hit.
A 2" BL means that wherever the suspension is, you still have 2" more room for the tyre to fit.
It is also possible to space your bumpstops down to increase tyre clearance (and this allows the fitment of longer shocks, the only way to increase wheel travel)
Tall spring lifts tend to make sierras behave badly. to hold a high arch the spring rate has to be quite high so the car rides badly and doesn't flex.
A 2" body lift will almost clear 32's by itself.
PS I don't really recommend resetting stock springs. The ride will be poor and the cost will be about 1/2 of good quality springs like OME Dakar.
Steve.
And to further this, by re-setting stock springs, or getting large lifted springs, you end up with a near verticle or even past verticle shackle angle, that makes ride quality and handling worse again. Stay well away.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Road Ranger
as well as risking shacke reversal and spring breakages, shackles need to be around 15deg thereabouts depending on factory spec as it forces if you will movement in the spring particularily in the early stages of the spring flexing ie on road over small bumps etc it is an integral part of the suspension set up working correctly, ride is one thing, but by forcing the system to work differently you are effectily promoting bend and snappage forward of the axle particulartily if you hit a pot hole etclay80n wrote:Gwagensteve wrote:You are missing part of the point.
Spring lift does not allow you to fit a bigger tyre. Even if the tyres clear with the car on level ground, when you flex the car up on an obstacle the tyre can still move up as far as it could before so the tyres will still hit.
A 2" BL means that wherever the suspension is, you still have 2" more room for the tyre to fit.
It is also possible to space your bumpstops down to increase tyre clearance (and this allows the fitment of longer shocks, the only way to increase wheel travel)
Tall spring lifts tend to make sierras behave badly. to hold a high arch the spring rate has to be quite high so the car rides badly and doesn't flex.
A 2" body lift will almost clear 32's by itself.
PS I don't really recommend resetting stock springs. The ride will be poor and the cost will be about 1/2 of good quality springs like OME Dakar.
Steve.
And to further this, by re-setting stock springs, or getting large lifted springs, you end up with a near verticle or even past verticle shackle angle, that makes ride quality and handling worse again. Stay well away.
Layto....
If the above post did not offend you in any way please PM me so I can try harder!!
All true guys and one of the reasons why 3" springs are a problem - because they are built to "work" without bumpstop spacers and with stock length shackles they are not long enough to provide correct shackle angle at the new height to allow for a decent ride and any droop travel.
I actually think is would be possible to build a soft riding 3" lift with bumpstop spacers of about 1" and about a 1" longer shackle, but only if the leaves were made to suit (i.e a little longer)
The problem then is that the shocks would be too short to make the most of the travel in the springs and so you woudl end up on the roundabout of major changes.
Steve.
I actually think is would be possible to build a soft riding 3" lift with bumpstop spacers of about 1" and about a 1" longer shackle, but only if the leaves were made to suit (i.e a little longer)
The problem then is that the shocks would be too short to make the most of the travel in the springs and so you woudl end up on the roundabout of major changes.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Hey, might be a bit late for this now seen as it sounds as though you have your shocks sorted, but there is a cheaper option for shocks.
Check this thread out if you'd like... not gonna be as good as OME or Ranchos etc etc... but cheaper. I run them right now with 2 inch ext shackles and 40mm ome springs and 31". They work well, but are limiting my droop a bit now that i have the new springs in, but not limiting enough ATM to force me to change them.
http://carl.outerlimits4x4.com/viewtopi ... iel+shocks
By the way boys - went to Janolan in NSW on the weekend... Very muddy and slippery - will post pics soon.
Check this thread out if you'd like... not gonna be as good as OME or Ranchos etc etc... but cheaper. I run them right now with 2 inch ext shackles and 40mm ome springs and 31". They work well, but are limiting my droop a bit now that i have the new springs in, but not limiting enough ATM to force me to change them.
http://carl.outerlimits4x4.com/viewtopi ... iel+shocks
By the way boys - went to Janolan in NSW on the weekend... Very muddy and slippery - will post pics soon.
'94 WT - 50mm shackles - 40mm OME MD springs - hammered seams - no front bar - 31" Simex 'pedes
I have never understood why eveyone says that lifted springs have to be stiffer .. why does the car weigh more if it is 3 inches higher ?
A lifted spring if made properly need not be any stiffer than a zero lift spring.
A lifted spring if made properly need not be any stiffer than a zero lift spring.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
they don't have to be but generally the cheaper ones are, as it is easier to just make them stiffer to hold the shape.love_mud wrote:I have never understood why eveyone says that lifted springs have to be stiffer .. why does the car weigh more if it is 3 inches higher ?
A lifted spring if made properly need not be any stiffer than a zero lift spring.
Ransom note = demand + collage
Yeah, as grimbo said, good ones are no less flexy. For eg i have found that the OME 40 mm lift is more flexy than my old stock springs. The ride is marginally stiffer, but they flex better (i dunno how that works - but it just does) I think as far as a 3 inch lift lifted sierra spring goes, cause the length of the leaf is quite short, to give it a 3 inch lift there would be quite a serious arc - especially on the front.
And generally speaking the greater the arc of a piece of metal, the less likely to flex it will be.
And generally speaking the greater the arc of a piece of metal, the less likely to flex it will be.
'94 WT - 50mm shackles - 40mm OME MD springs - hammered seams - no front bar - 31" Simex 'pedes
I know that they dont have to be, but I guess like alot of stuff on here people are simply regurgitating information they heard from a friends brothers uncle (or Greg).
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
No, actually I disagree, I think they do have to be stiff and here's why.grimbo wrote:they don't have to be but generally the cheaper ones are, as it is easier to just make them stiffer to hold the shape.love_mud wrote:I have never understood why eveyone says that lifted springs have to be stiffer .. why does the car weigh more if it is 3 inches higher ?
A lifted spring if made properly need not be any stiffer than a zero lift spring.
A sierra fron has 5" of travel stock, nominally 2" compression, 3" droop. that is what the spring length, shock length, and shackle length was designed for.
To run a 3" lift spring, there will be no droop travel left in the system at normal ride height, so regardless of the amount of arch the spring starts with (and it mist start with much more arch when unladen) the spring will have to be compressed to reach the stock shackle at full droop and the shock eye at full droop.
THIS is what leads to a choppy ride on 3" listed sierras.
Longer shocks can help, but unless the upper mount is movedup wards, a bumpstop spacer will hasve to be fitted, generally resulting in a small increase in total travel.
Basically, the spring length and parameters set by shackle location, axle location and shock length dictate that a sierra with 3" of all spring lift ride badly. This is true of cheap springs and even good springs like OME, if a HD spring is used in a light car as an example to get "extra" lift.
That's the beauty of RUF - you take a longer spring with a lower rate and more static arch and compress it a long way to get ride height. By changing the parameters set by the mounts etc you can fix the problem.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
It will all depend on how much you want to pay- UPS - under a week, but it costs- up to $20/kg.
What are you chasing via them? Might be worth another search or another thread to keep this one on topic, there has been heaps of stuff on lockers and gears lately if it's about them.
Steve.
What are you chasing via them? Might be worth another search or another thread to keep this one on topic, there has been heaps of stuff on lockers and gears lately if it's about them.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I get them to send stuff USPS (US Postal service). It's cheaper and just about as quick ( about a week - Sean uses the Global Express service so it can still be tracked) plus if it's under a AUD$1000 then there is no need for a customs clearance, duty or GST.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
If you ship with UPS or similar and the cost is under $1000, no duty to pay, you will have them in a week for sure.
I was recently involved in a bulk order from trail tough, heaps of stuff, 60KG or so of weight, UPS'ed in a week door to door.
We did pay about $20 on nearly 60kg and duty and I still landed a TT gearset for well under $1k.
I know some people have done as good as $750 landed.
Steve.
I was recently involved in a bulk order from trail tough, heaps of stuff, 60KG or so of weight, UPS'ed in a week door to door.
We did pay about $20 on nearly 60kg and duty and I still landed a TT gearset for well under $1k.
I know some people have done as good as $750 landed.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 80 guests