Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3" leaf lift???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I think you have your answer then :D

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 67
Joined: Sun Jun 03, 2007 1:57 pm
Location: Melb

Post by 4wd junky »

forgot to add that marks website advertises gears at $1100 but on the phone was quoted $1150 and that thats the reduced price because they're clearing the stock as these gears are noisy but according to them all reduction gears are noisy.. :?
forgot to ask the regular price :oops:
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

My TT 6.4:1 is silent at all speeds, even low range.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 67
Joined: Sun Jun 03, 2007 1:57 pm
Location: Melb

Post by 4wd junky »

ha ha thought the bloke on the phone was just blowin smoke up my rear end as ive only heard a few complaints but ill deffinately be importing from u.s and i cant believe how quik sean responded to my email,i thought it would be at least a couple of hrs if not days for a response
Posts: 31
Joined: Fri Jun 22, 2007 1:21 pm
Location: Barossa

Springs 3"

Post by vk5hks »

What does everyone think of Calmini gear?

E.g liftkits and so forth?

Are there any legal things being dodged as they are American?
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Re: Springs 3"

Post by lay80n »

vk5hks wrote:What does everyone think of Calmini gear?

E.g liftkits and so forth?

Are there any legal things being dodged as they are American?

Have a search or start a new thread instead of hijacking a thread, it has been discused before.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

roughly what are a set of custom springs worth?
Ie if you were going to NT the spring spacing under the chassis, and were moving mounts anyway, you could get a set made up the right height (ie 3"), bit longer, get a good shackle angle, correct pin location etc.
but how much $$$???
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests