Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will GU td42T exhaust bolt onto Gq td42t from dump pipe back

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

will GU td42T exhaust bolt onto Gq td42t from dump pipe back

Post by InSanE »

i can get a 3" mandrel bent exhaust from our exhaust supplier at work for a good price it is 3 peice with bolt together flanges and a flex pipe but they only have a listing for GU and i would like to get it to fit my GQ will it bolt up? i assume the chasis and exhaust mounts are the same ?
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: will GU td42T exhaust bolt onto Gq td42t from dump pipe

Post by bogged »

possibly... but all depends on the turbo system you have.. if its exactly the same as a factory GU one, then yes it will, if it isnt then little chance it will..

EG Denco is a above manifold high fit turbo, safari is down below manifold at least 12inches different in height.
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Yes the Beaudesert Exhaust 3" mandrel bent system on my old wagon was a GU kit
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Post by InSanE »

yea i have a topmount manofold but im making the dump pipe myself to fit the exhaust i get so that wont be a problem im just wondering if the exhaust hangers are in the same spot on the chasis between the 2 models
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

There are some differences in the exhaust mounts under the vehicle between models.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

have been told gu coil cab is same as gq wagon, gu wagon has different mounts
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests