Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bottom hose on GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 38
Joined: Fri Jun 09, 2006 3:47 pm

bottom hose on GQ

Post by petespatrol »

after lifting the body 2in my bottom radiator hose has a small kink in it, what can i do to fix this,,, has anybody else had the problem
thanks guys
Top
Posts: 124
Joined: Tue Sep 26, 2006 8:34 pm
Location: newcastle

bottom hose

Post by daz4b »

hi i take hose off turn around 180 degrees and trim to suit
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Yeah, just cut a bit off the end
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

i had to trim about an inch off each end for mine then jam the bugger back on there

(for a tb42)
1988 351W GQ wagon
Top
Posts: 310
Joined: Fri Jan 12, 2007 1:22 pm
Location: brisbane

Post by azwa »

I havent done anything for my one yet,doesnt overheat so if it aint farkd dont fix it ;) just havent bothered yet only been2 months.
"instant combustion"
"ITS A JEEP THING"
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

i didn't bother with mine. and its been about a year and no probs
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

I bought a supercheap corrugated hose, that allows it to bend on the corrugations, and the hose itself also contains a coil to prevent crimping it.
It cost like $9 or $13 or something. Not expensive, and has done the job really well. But my bend was caused by an Aussie Desert Cooler radiator and not by a lift kit, so not 100% sure it will help you.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests