Hi guys ive been following this forum for a little while gathering all the great info etc its been heaps of help cheers.
My question is ive been offered some OME competion spec coils made for 80 series cruisers, they are the 3 inch lift ones which i no is going to be a lot more lift on my GQ SWB safari but have any you guys fitted these to a SWB GQ before and if so what lenght shockies did you use.? the part numbers for the coils are OME 418 3in/75mm fronts the rear are OME 421 3in/75mm allso the linear rate for the front are 300lb and the rear 280lb
The other prob i might find is that they will be too stiff but ive got a PTO and heavy winch bar on the front allso.
Cheers guys i appreciate any help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Nissan GQ safari suspention questions.? OME comp spec coils
Who is online
Users browsing this forum: No registered users and 2 guests