Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nother idea for sliders

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

nother idea for sliders

Post by redzook »

found this on the net they look pretty good
although i would prolly put another brace across

http://bbs.off-road.com/ubbthreads/show ... o=&fpart=1
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

not bad
but no gain in sill clearance
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

My findings were that sliders aren't all that necessary - the sills don't stick much at all :cool:
DMA Founding Member #1 - Now Retired
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

N*A*M wrote:not bad
but no gain in sill clearance

no loss of clearance really either where as
most other sliders hang down below the sill ;)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

greg wrote:My findings were that sliders aren't all that necessary - the sills don't stick much at all :cool:
did i read somewhere that u had trouble gettin your door back on :roll:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

redzook wrote:did i read somewhere that u had trouble gettin your door back on :roll:


maybe :roll:

Nah - no real trouble - just no one had a hammer so i used a chunk of concrete - there's video of it on the suzuki club yahoo group...

http://autos.groups.yahoo.com/group/Suzuki_4WD_Club/

and the file is:

http://f1.grp.yahoofs.com/v1/4AWeP6g0tS ... 010023.MOV

I presume you will need to register as a member to see it though.

:D
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests