OK, I use my Paj in the water, mainly on my property, nothing serious mind you , just some splashin in the creek, nothing above wheel height & I certainly dont remember it taking a bad dunking. Just good fun, I thought.
So I had this bad noise coming from the front axle when I recently tried to engage 4WD. I immediately thought bad vacuum lines & all that sort of stuff. They all checked out OK, so i took the Paj to my local diff guy.
Turns out the front diff was full of water!! result one badly farked front end, including ARB locker hemisphere! Ouch $1200 just for that baby, lucky I still have a spare front diff in good nick so they can salvage CW&P off that.
I still cant understand where the H2o got in but it sure got in. All in all a damn expensive $$$ exercise. So guess what , no more water for me & regular checking of diff fluids etc.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
be warned , guys who drive in water!
Moderator: -Scott-
be warned , guys who drive in water!
Last edited by Ian Sharpe on Thu Jun 21, 2007 12:42 pm, edited 1 time in total.
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
water
yeh im with you ian,
water is a shit! iv replaced 2 x steering knuckle bearings, several cv boots, another CV that was chipping away, a brake caliper, wheel bearings both sides, all seals in the front end of the mighty paj and theres still suggestions of water damage through other parts. Water and/or mud is not good, iv never liked mud anyways, even less now. It seems that a SAS could be a solution, a live axle setup just doesnt seem to be so finicky. I have never had a problem with the rear end, not like i do the front, and it goes the same places the front does. For me, i have seriously thought about the future of the pajero lately, SAS, buy a zook, save some moneys and buy a GU coil cab for touring aus, sell paj buy road going car for 12 months, save moneys buy a Patrol, im not sure....For the moment everything is really good with the paj andi actually am off the thought opf selling for a moment. Who knows.....
dean
water is a shit! iv replaced 2 x steering knuckle bearings, several cv boots, another CV that was chipping away, a brake caliper, wheel bearings both sides, all seals in the front end of the mighty paj and theres still suggestions of water damage through other parts. Water and/or mud is not good, iv never liked mud anyways, even less now. It seems that a SAS could be a solution, a live axle setup just doesnt seem to be so finicky. I have never had a problem with the rear end, not like i do the front, and it goes the same places the front does. For me, i have seriously thought about the future of the pajero lately, SAS, buy a zook, save some moneys and buy a GU coil cab for touring aus, sell paj buy road going car for 12 months, save moneys buy a Patrol, im not sure....For the moment everything is really good with the paj andi actually am off the thought opf selling for a moment. Who knows.....
dean
Interesting. I am regularily in water, often over wheel height, that is all my vehicle gets used for is off roading (bar the driving on the road to get there) it does about 5000km a year.
I have never had water in any diffs or gearbox. I checked them religiously after any water trip after I first got it, and never had any so now don't bother unless I have just been on a big trip and or sitting (stuck) in deep water.
I reckon if it is getting in it will be on the LHS where the inner cv pushes into the diff housing as this is where they can tend to weep. Mine has a slight weep but surprisingly it doesn't let water it.
The water and mud is a pain with ball joints etc.
NJ
I have never had water in any diffs or gearbox. I checked them religiously after any water trip after I first got it, and never had any so now don't bother unless I have just been on a big trip and or sitting (stuck) in deep water.
I reckon if it is getting in it will be on the LHS where the inner cv pushes into the diff housing as this is where they can tend to weep. Mine has a slight weep but surprisingly it doesn't let water it.
The water and mud is a pain with ball joints etc.
NJ
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Sorry, never had a problem with water. Except the doors leaked sometimes in very deep water. Talking over front of bonnet deepth.
I try and let things cool abit before plunging in and never intentionally stop in deep water.
That was my NJ.
I try and let things cool abit before plunging in and never intentionally stop in deep water.
That was my NJ.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb
Experience is something you don't get, until just after you need it.
'90 Maruti Ute 1Ltr Lwb
Experience is something you don't get, until just after you need it.
Zute, that is a very good point - I won't go roaring into deep water, always try to cool my heals a bit first, it doesn't take to long for oils to cool.
Ian, I'm afraid I couldnt have the attitude towards water that you do
- I'd go insane! 
Drawn to it like moths to a light bulb!!
I am imagine the frustration of having to turf a front locker thou... What was the damage - bearings rusted?
Ian, I'm afraid I couldnt have the attitude towards water that you do
- I'd go insane! Drawn to it like moths to a light bulb!!I am imagine the frustration of having to turf a front locker thou... What was the damage - bearings rusted?
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
NJ,
Bearings farked, rusted, CW&P farked, ARB locker farked.
Most stuff farked!! Fark me.
$1200 for a new ARB hemisphere, I supplied another CW&P , new seals, bearings all round (not sure about wheel bearings though), labour.
I dont think i'll get much change from $2k.
Mate, its so depressing , all I can do is farking stay away from water.
Bearings farked, rusted, CW&P farked, ARB locker farked.
Most stuff farked!! Fark me.
$1200 for a new ARB hemisphere, I supplied another CW&P , new seals, bearings all round (not sure about wheel bearings though), labour.
I dont think i'll get much change from $2k.
Mate, its so depressing , all I can do is farking stay away from water.
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Feel for ya mate 
. I am still completely locker less... Have not sourced another factory rear ($$$$$), just biding my time till the ARB one arrives... Not long now.... maybe....
. I am still completely locker less... Have not sourced another factory rear ($$$$$), just biding my time till the ARB one arrives... Not long now.... maybe....1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
funny about this, im in the process of doing all bearings on car ..two week saga so far.
i check diff and trans fluids after every meeting with the water ... but have had some noises of late ... bearings were ok ...but the smaller bearing on the inside of the hubs (where the cv pokes into) was non existant on both hubs .. the two wheel bearings were not the problem.
so that and all the bushes on the two trailing arms, transmission linkages - transfer mounts ... tailshaft seals ..... heaps needed replacing ... hopefully this is it for a while ...all goes back together sat/sun ....
water/mud holes .... are not nice ... think its ok as long as you KNOW your not going to get stuck and sit still in them ..... i do run long diff breathers - never had water in them .....
just thought id share my experience with water
i check diff and trans fluids after every meeting with the water ... but have had some noises of late ... bearings were ok ...but the smaller bearing on the inside of the hubs (where the cv pokes into) was non existant on both hubs .. the two wheel bearings were not the problem.
so that and all the bushes on the two trailing arms, transmission linkages - transfer mounts ... tailshaft seals ..... heaps needed replacing ... hopefully this is it for a while ...all goes back together sat/sun ....
water/mud holes .... are not nice ... think its ok as long as you KNOW your not going to get stuck and sit still in them ..... i do run long diff breathers - never had water in them .....
just thought id share my experience with water
www.victoriancampertrailers.com.au
www.salon13.com.au
www.salon13.com.au
Well, get underneath and have a look
Other possibilities are:
1. It was never there
2. It was there originally but someone took it off and left it off (most likely when you got your locker)
3. They did not seal around the diff centre properly when they put in the locker and put the centre back into the housing
4. Its there but split or perished
Other possibilities are:
1. It was never there
2. It was there originally but someone took it off and left it off (most likely when you got your locker)
3. They did not seal around the diff centre properly when they put in the locker and put the centre back into the housing
4. Its there but split or perished
Yes, it does, but it's a pathetic little vacuum tube sized line which blocks easily.Ian Sharpe wrote:as far as i know the Paj does have breather that extends up to the engine bay.???PajeroSRV wrote:Yep, as Hayden said, you need diff breathers........
Have a hunt around on 4x4 Wire. Frank posted an article on upgrading the breather to something a little less pathetic - in typical Frank fashion, it's an excellent job!
I'm probably a bit anal with my grease gun in that every oil change every nipple gets a squirt. I also spend about an hour looking underneath to make sure every thing looks to be in place.
I'm not very trusting when it comes to other people touching my car, so I like to check there work.
I'm not very trusting when it comes to other people touching my car, so I like to check there work.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb
Experience is something you don't get, until just after you need it.
'90 Maruti Ute 1Ltr Lwb
Experience is something you don't get, until just after you need it.
thanks Frank, I'll take a look at this when I get the Paj back. Good news (if there can be any good news) is that no other water contamination was found, ie transfer case, tranny or rear diff. All in all , this has been a nasty experience & costly too!.Bitsamissin wrote:http://www.4x4wire.com/mitsubishi/tech/ ... breathers/
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Yeah thats why I try and avoid mud/water if I possibly can.
If I have to go through it I will but if there is another way round I will always take it.
Bog hole heroes = max maintenance $$ (been there done that).
The IFS is much more susceptable to water ingress than a live axle.
If I have to go through it I will but if there is another way round I will always take it.
Bog hole heroes = max maintenance $$ (been there done that).
The IFS is much more susceptable to water ingress than a live axle.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 23 guests