Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU CV?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

GU CV?

Post by GU BUG »

Done a drivers side CV on the GU today & I was wondering who around the Sunny Coast sells/makes heat treated CV's & what sort of price would I be looking at or would it be better to just stick with genuine?

Any help/advice appreciated.

Joe
More poke = More smoke!!!
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Stick with genuine. There have been a few on here (cv & axle) for sale.

I dont think any one does heat treated GU cv's and they are very strong standard. Must have just been wear and tear weakness.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

Post by GU BUG »

Yeah I've been giving it bit of a hard time the last few trips out & the Rock crawl @ Battle of The Staes could have had something to do with it too :?

Has anyone bought one of Hobzee's CV's? They're on the cheap side compared to genuine just wondering if anyone's put them in theirs & what they reckon?

cheers
Joe
More poke = More smoke!!!
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

Joe never buy a Chinese made CV, stick with genuine, 2nd hand genuine will be better than chinese new ;)
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 270
Joined: Sat Apr 29, 2006 6:03 pm
Location: Victoria

Post by TEAMRPM »

GU BUG wrote:Yeah I've been giving it bit of a hard time the last few trips out & the Rock crawl @ Battle of The Staes could have had something to do with it too :?

Has anyone bought one of Hobzee's CV's? They're on the cheap side compared to genuine just wondering if anyone's put them in theirs & what they reckon?

cheers
Joe

just put a genuine back in it. it would've taken a floggin to break it in the first place. :D
Top
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

Post by GU BUG »

Hmmm.....I'll price a genuine one tomorrow :?.
More poke = More smoke!!!
Top
Posts: 851
Joined: Wed Oct 20, 2004 9:41 am
Location: Caboolture

Post by Troll00 »

Try this guy

For CV Driveshaft sales & repairs contact C.V.1.
We stock QUALITY NTN CV Joints & Axles for your FOURBY!
0410 346 341
cv1aust@optusnet.com.au
The Original Massojet
Check you local 4x4/Ray's Outdoors store for stock NOW
Top
User avatar
jav
Posts: 715
Joined: Wed Dec 03, 2003 10:19 am
Location: walloon, queensland

Post by jav »

bobtail on here does heat treated gu cv's.
Top
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

Post by GU BUG »

Troll00 wrote:Try this guy

For CV Driveshaft sales & repairs contact C.V.1.
We stock QUALITY NTN CV Joints & Axles for your FOURBY!
0410 346 341
cv1aust@optusnet.com.au
A top bloke too.

Spoke to him this arvo & he was very helpful with a quick rundown on who, how, why & his prices are a hell of a lot cheaper than genuine :cool: .
More poke = More smoke!!!
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

I know of a few with Hobzee's CV's in and I just put one in the other weekend. Haven't heard of anyone braking one yet

I know he has sold stacks of these, give him a call.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 660
Joined: Sat Jul 30, 2005 5:43 pm
Location: No fixed address....

Post by GU BUG »

I'll be buying a pair anyway for spares ($55 ea, you can't go wrong) & replace the busted one I have with a ntn from C.V.1.

I may even put Hobzee's CV in first to see how it goes & have the other from CV1 as my spare :??
More poke = More smoke!!!
Top
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

LOL Joe sounds like $55ea is a great price.. i would have a spare for that price as well..

A friend got a second hand GQ CV the short side for $130 from the wreckers LOL

Rick.
Top
Posts: 20
Joined: Sat Mar 03, 2007 10:45 am
Location: Gold Coast

Post by C.V.1 »

GU BUG wrote:
Troll00 wrote:Try this guy

For CV Driveshaft sales & repairs contact C.V.1.
We stock QUALITY NTN CV Joints & Axles for your FOURBY!
0410 346 341
cv1aust@optusnet.com.au
A top bloke too.

Spoke to him this arvo & he was very helpful with a quick rundown on who, how, why & his prices are a hell of a lot cheaper than genuine :cool: .
Thanks for the kind words Joe!
Always in stock and always cheaper than the others!
GU Joint & Axle, GQ Joint & Axle , GQ Joint only.
If any of the Nissan drivers out there need anything , give us a call or pm me!
Cheers!
Damo.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests