Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80Series Strenghtened Rear Axles

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 72
Joined: Thu Jan 04, 2007 6:55 pm
Location: Melbourne, VIC

80Series Strenghtened Rear Axles

Post by DGS4WD »

Im serious wanting to purchase strenghtened rear axles for my 80series landcruiser ASAP but am struggling to find anyone that sells them. One of my current rear axles is damaged and needs to be replaced so my 4WD is staying put until I get new ones.

Was going to purchase Longfield rear axles but unfortunatly found out they don't make them.

Any suggestions was be greatly appriciated!
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Try here http://www.polyperformance.com/shop/pro ... 149&page=1
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

105 series rear end, thicker axles more splines larger diameter studs, same diff body as 80....length and all
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

you should be able to get one cheap!!

but i dont think the centre will go in, so you need new centre!
hands and mums dont count!!!
Top
Posts: 72
Joined: Thu Jan 04, 2007 6:55 pm
Location: Melbourne, VIC

Post by DGS4WD »

Thanks guys, not wanting to change my diffs because have recently spent a bit of money rebuilding them both and putting in ratios and ARB lockers BUT and am liking the looks of the ones that RV80 sent me. Cheers.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

Those poly axels look th go. There must be someome out here that can get these axels because i would be interested in getting some as well. Same as the front with the longfields, someone must do them out here. I'd buy the whole kit front and rear.

Greg
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

You can buy those axles, just call Poly Performance and have them shipped over...
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Jack Macnamara in Melbourne does HD Chromo rear axles for the 80 series cruiser.
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

have we got a price from mcnamara?
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Last set i bought were $660 the pair.
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

RUFF wrote:Last set i bought were $660 the pair.
were these any good? I guess it would be hard to compare these to the polyperformance axels as no one out here probably has tried them.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest