Hey guys i need to get lower control arm bushes for my SWB vit 94.
Who do you guys reccomend in QLD?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vitara suspension
Vitara suspension
beach bandit
LWB 85 1.3L,webber,sunny's
Build in Progress, Parts needed....
LWB 85 1.3L,webber,sunny's
Build in Progress, Parts needed....
mrmaggo,
I recently had all the lower control arm bushes and the rear trailing arm bushes on my Vit replaced with polyurethane by TJM Coopers Plains. Pretty sure from discussions with TJM that all of the components came from Pedders who also sell the tie rod ends as well.
I recently had all the lower control arm bushes and the rear trailing arm bushes on my Vit replaced with polyurethane by TJM Coopers Plains. Pretty sure from discussions with TJM that all of the components came from Pedders who also sell the tie rod ends as well.
RodW
2007 SR Diesel Dual cab
2007 SR Diesel Dual cab
All up with a wheel alignment (which cost $35), the bill came to $525. The Lower Control Arm bushes alone would have been about $300. You will need the alignment. I only got this done in the last month or so.
There is a Pedders in Rocky, why don't ypu just go and see them?
There is a Pedders in Rocky, why don't ypu just go and see them?
RodW
2007 SR Diesel Dual cab
2007 SR Diesel Dual cab
Who is online
Users browsing this forum: No registered users and 3 guests