Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cage mount to floor
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Cage mount to floor
What size mounting plate to you have to run for comps with internal cages.
www.ausjeepoffroad.com
MY99 WJ
MY99 WJ
It varies from point to point, for e.g A+B pillar mountings minimum requirement is 100x100x3mm (15,000mm2) and rear stays is 80x80x3mm (6000mm2) this is for vehicles that weigh over 1151 kg and its also the specs for an internal cage, this meets ccda and cams specs.
Ben
Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Im pretty sure it is 100 x 150 mm for a and b pillar and 100 x 120 mm for rear stays . better check the ccda website .Evil 73 wrote:It varies from point to point, for e.g A+B pillar mountings minimum requirement is 100x100x3mm (15,000mm2) and rear stays is 80x80x3mm (6000mm2) this is for vehicles that weigh over 1151 kg and its also the specs for an internal cage, this meets ccda and cams specs.
Ben
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
http://www.autobalance.com.au/
www.4bfabrications.com.au
Yeah ya better.....bagsy wrote:Im pretty sure it is 100 x 150 mm for a and b pillar and 100 x 120 mm for rear stays . better check the ccda website .Evil 73 wrote:It varies from point to point, for e.g A+B pillar mountings minimum requirement is 100x100x3mm (15,000mm2) and rear stays is 80x80x3mm (6000mm2) this is for vehicles that weigh over 1151 kg and its also the specs for an internal cage, this meets ccda and cams specs.
Ben
Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Im here for the sausage!
Evil 73 wrote:Yeah ya better.....bagsy wrote:Im pretty sure it is 100 x 150 mm for a and b pillar and 100 x 120 mm for rear stays . better check the ccda website .Evil 73 wrote:It varies from point to point, for e.g A+B pillar mountings minimum requirement is 100x100x3mm (15,000mm2) and rear stays is 80x80x3mm (6000mm2) this is for vehicles that weigh over 1151 kg and its also the specs for an internal cage, this meets ccda and cams specs.
Ben
Ben
Wondering how you came up with the mm2 calcs??
they dont seem to add up?? am i missing something?
cheers
DRS
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Yeah mate I checked it ......My cage is ccda approved . Is yoursEvil 73 wrote:Yeah ya better.....bagsy wrote:Im pretty sure it is 100 x 150 mm for a and b pillar and 100 x 120 mm for rear stays . better check the ccda website .Evil 73 wrote:It varies from point to point, for e.g A+B pillar mountings minimum requirement is 100x100x3mm (15,000mm2) and rear stays is 80x80x3mm (6000mm2) this is for vehicles that weigh over 1151 kg and its also the specs for an internal cage, this meets ccda and cams specs.
Ben
Ben
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
http://www.autobalance.com.au/
www.4bfabrications.com.au
Who is online
Users browsing this forum: No registered users and 2 guests