Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What springs did you use to lift your Gen 2 pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

What springs did you use to lift your Gen 2 pajero

Post by Dexter »

Hey everyone,

I have been seaching this page alot to try and find what people are using for their suspension lifts. I have found some tough dog coils online but they are only quoted as being 40mm lift.... this is more like 1.5 inches, is that what other companies are rated at also?

Thanks in advance.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

have you tried GQ coils?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

Yeah, I have read about them on here a few times, most reports are about how good they are then, after two weeks the OP states that they are too bouncy or stiff... Or that they are worried about the destruction on Uni joints. So was just looking for some off the shelf ones, if not I will look at GQ springs.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

what area are you from?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

Sunny melbourne.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

was going to say, u could have got my lifted springs outa my jabber but your a bit too far away
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

Heheh Bummer, thanks for the thought though dude. What brand are they/ where did you get them from?
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

cant remember the brand but it was a place in moorebank. they also had a shop in vic i think.
might have been "fox" or something.
aparently they make suspension parts and sell them to other companies that rebadge them as their own
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 123
Joined: Fri Oct 28, 2005 5:49 pm
Location: 44 Million Sheep

Post by Overkill »

We started with TJM Progressive rate springs that stated they would give a 50mm lift, they did for about 500k's then sagged about 20mm. Went and brought a set of second hand Dobinsons Linear rate coils at a great price and they have kept their height since we put them in, the guy we brought them from had only done 1000k's. The lifted height was also more with the Dobinsons, only by about 10mm, this was even when the TJM coils where new.
I LIKE IT, I LIKE IT ALOT!!!!!!!!!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 2 guests