Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARB tyre deflator

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

$57 isnt too bad :armsup:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 28
Joined: Fri Sep 22, 2006 9:44 pm

Post by Alpine Hunter »

j-top paj wrote:
Alpine Hunter wrote:Shit guys! Dont you go bush to relax a little and escape the whole city time freak mentality?
Spend the extra couple of minutes, light a fire, boil the billy and chill.
light a fire while airing down? :?
Why not? You dont have to, it was just a suggestion and my point was more about escaping that time mentality when you go bush.

Totally understand the gadget thing though!
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Using my 'gadget', I have more time to relax and not worrying about losing valve cores, or sticks breaking off into the valve stem. :D

Mine was around $60 also, from ARB Newcastle. They couldn't keep up the demand for them, I got the last one they had in store, and had a few dozen on backorder.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

my stauns still do ok for now. when i get a second 4wd on the road il probably stick the stauns in it and get one of these for the GU
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 232
Joined: Tue Nov 25, 2003 1:35 am

Post by ozrunner »

..... the only thing is there's a bit of screwing around for each tyre (screw deflator on, unscrew valve, pull out lever, push in lever, re-screw valve, unscrew deflator) and in reality it's not THAT much faster than stauns.
I just don’t get it.

All this farting about with unscrewing parts and levers etc etc while hovering over each tyre and possibly in pissing rain, when you can just lean over screw the Stauns on and go have a yak, slash or whatever.

I previously tested dropping the pressure using my old normal method of simply unscrewing the valve and testing with a gauge and replacing the valve etc on all 4 tyres. Then I did the same with the Stauns. Result 13sec quicker using the old way. By the time you do all the swapping around, screwing unscrewing etc this gadget looks like it could even be slower.

Can't see the point in saving 13 seconds or even a tad more when you have to hover over tyres mucking about removing valves etc. As far as accuracy goes, again I’m lost as mine all drop to the same pressure every time. Its not hard to set them all accurately and a periodic spray with wd40 keeps them free inside.

Maybe there is a larger difference with huge boggers but for normal tyres it’s no fuss Stauns for me :D

.
Last edited by ozrunner on Tue Jul 10, 2007 1:41 pm, edited 1 time in total.
Posts: 55
Joined: Tue Jul 27, 2004 8:22 pm
Location: castlemaine Vic.

Post by redman »

I have two sets of stauns and I still use a stick with my gauge, why I don't really know it's just how I do it. Mine are only 33's if I had bigger I would use the arb thingo ;)
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

never got a stick stuck in your valve?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

ozrunner wrote:
By the time you do all the swapping around, screwing unscrewing etc this gadget looks like it could even be slower.
If you had used one, you would know its way faster than your old school method. And the rate of air deflation is extremely fast compared to the Stauns, not to mention heaps more accurate.

You can't comment because you have not had the privelidge yet :D
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 232
Joined: Tue Nov 25, 2003 1:35 am

Post by ozrunner »

.. And the rate of air deflation is extremely fast compared to the Stauns, not to mention heaps more accurate.

You can't comment because you have not had the privilege yet :D

I think its a privilege I will do without :D

My Stauns are always dead accurate and I can go have a yak to others while they're hovering over their tyres and screw with their concentration :D

.
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

i just got one as i am a "gadget" junky,love it for $58.00 it is so much easier to use than my stauns .
I think anything cheap that makes life easy is worth it,so you can concentrate on the more important things like 4wding.
THE GRASS MAY BE GREENER ON THE OTHER SIDE BUT YOU STILL GOTTA MOW IT.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

cant fault it, picked a new one up at mates rates prices of $30(he lost money on that purchase :D ) and in the 6 months its sat in my glovebox unused, it has not given me any grief at all! it even looks brand new still :D
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests