4Runner 2L Alternator Oil Feed Line

[eggman]

Oil pressure feed line on my 2L has split near the banjo fitting. According to toyota they don't make spares anymore. Pirtek quoted me $70 to make a new one. They also said there was no fittings available with the same thread to ditch the banjos all together.

Surely theres enough 2L engines out there for someone to make these aftermarket. Anyone know of aftermarket toyota spare parts places?

[+dj_hansen+]

I had to replace mine a few years ago and got the part from Toyota.... but trust me it was a more than $70.....! even at trade price.

Pirtek or Enzed would be your only choice, unless you want to go to a wrecker and have a scratch around for one that looks reasonable, but that might end up costing your more in the long run.

[bribiesurf]

I had one start leaking ages ago, just cut the rubber hose and crimps off and took the clean banjo fittings down to hydraulic hose mob, they just cut a section of hose the same length and crimped it on the old fittings @$25 from memory, it worked fine, I think the hose was rated to 150psi so no problems at all