Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundera Suspension Question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Bundera Suspension Question

Post by Skip »

On a Bundera with standard suspension, how much clearance should there be to the front bump stop when at rest on a level surface, ive heard 1", sound right?
Top
Posts: 183
Joined: Sun Nov 10, 2002 7:05 pm
Location: Melbourne

Contact:
Contact Bundytime

Post by Bundytime »

i would say more like 2 inches from factory maybe an inch if the springs r old and depends if u have a bull bar, winch.......
Top
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

Thanks, ill see where my 1JZ pushes it down to.
Top
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

Skip when I wanted an exact measurement on my suspension I took it to Pedders and paid them $14 to measure it to specifications.I got it all written down to the last mm on each corner.They expect you to get it all fixed up there but their prices are outrageous.
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

I am with daniel on that one... i would say around 2" too.

Nick
______________________
PRAISE THE LIFTED
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests