Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

maintenance on 4x4?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

maintenance on 4x4?

Post by vanbox »

my GQ shorty is now only used for weekend playing. just wandering what i can do to it while its sitting in the shed doing nothing to help prolong the life of it.

the only thing i came up with was to d/c the batteries.

anything else? suggestions?


cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

start it everynow and then
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

start it everynow and then
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

If its gonna sit for really long periods, block all vital holes to stop mud wasps moving in (dad does it to his outboard).

Put it on stands, that way the tyres dont get flat spots.

DONT put a tarp over it! Did this to dads old datsun 1200 ute, it sweated the paint off the bonnet (probably bas re-spray).

Definitly take it for a drive around (the yeard at least) regulalry to keep the oil circulating in all places, etc. Do it in 4WD with hubs locked too. And use the brakes, to clean the rotors etc.

If you cant take it for a spin, at least turn the engine over (by hand if you must).

You could also put it in an airtight container and polish it each day, but that might be too far ;) .[/b]
Wheeling on completely wicked angles, without even looking stable.
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

Highway-Star wrote:
You could also put it in an airtight container and polish it each day, but that might be too far ;) .[/b]
:lol:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Get a trickle charger, i have one on my motorbike, it sits for 12 months at a time, and it is always ready to go
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

For the same amount of trouble you could always drive it more and have more fun wheeling!
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

Highway-Star wrote: You could also put it in an airtight container and polish it each day, but that might be too far ;) .[/b]

Hahahaha, its not a HT Monaro or Phase III GT, hahahhaa
It's hard to soar like an eagle when you are surrounded by geese.
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Post by Pinball »

Highway-Star wrote:You could also put it in an airtight container and polish it each day, but that might be too far ;) .[/b]
But i saw on the antique roadshow that this actually reduces the value of the object, for starters you are removing the natural patina of age that gives it character and you also risk damaging the original coating! ;)

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Pinball wrote:
Highway-Star wrote:You could also put it in an airtight container and polish it each day, but that might be too far ;) .[/b]
But i saw on the antique roadshow that this actually reduces the value of the object, for starters you are removing the natural patina of age that gives it character and you also risk damaging the original coating! ;)

Spock
Thats like on crusin' a few weeks ago. Some bloke had an original GT Falcon (XY I think). And there was discussion as to if it should be left as is (terrible), or 'restored' to its former glory. I'm used to the whole antique stuff, Mums into the old china and furniture etc. Dad watches that bloody antique roadshow religiously.

I think a GQ might be a tad different to a 300 year old lump of tree that resembles a piece of furntiture? I'd rather have the GQ, heaps more fun, and practicle :) .

Give me the HT GTS Monaro anyday. I love those things, the GTHO is great, but the HK-HT-HG Monaros are it! Or a GTR-XU1 Torana. I'm a Holden freak, can't help it (I do respect a good old ford though). After Holden comes Suzuki, funny that...

If Vanbox's GQ is gettin used for 'weekend playin', I dont reckon he'd be too worried about the 'patina', or the original coating. Also vanbox, I reckon sitting it in the shed is prolonging its life anyway; as opposed to sliding over rocks, submerging it in mud, and banging into trees.
Wheeling on completely wicked angles, without even looking stable.
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

all valuable points and some things i didnt think about. i wish i could get out there and use it everyday, would be a load of fun. but it does sit in the shed for usually a minimum of 2 wks :cry: sometimes up to a month. :bad-words:

i should really clean it though, cause at the moment it has about 3 months worth of mud, dust and dirt on/in it from various parts of this great country. thanks for all the info guys!

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

Highway-Star wrote:If its gonna sit for really long periods, block all vital holes to stop mud wasps moving in (dad does it to his outboard).

Put it on stands, that way the tyres dont get flat spots.
;) .[/b]

i like those 2 ideas very smart :idea:
brentz
TUF-60 starting build soon
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests