Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1986 Bundera(?)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

1986 Bundera(?)

Post by RockyF75 »

Mate saw one for sale today and liked it,it looks to be in good nick. Just want to find out a few things about it for him.
Its an 86 model, 4.2L V6 Petty. 250000 on the clock. LX Model.
What sort of mileage would he expect to get?
Is it Carby or EFI?
Coils or Leafs?
250,000ks seems like a fair bit for a petty to me, can anyone comment on this?
Any known or common issues to look for during an inspection?
Is $3500 reasonable for one that seems, cosmetically at least, to be in good nick. And the guy assures me over the phone its got "a good engine and a good gearbox" :lol:

Back on the amount of K's for a sec, what would you expect to pay for a rebuild? or whats a cheap transplant option if the engine goes sour after he buys it?
Last edited by RockyF75 on Thu Jul 12, 2007 8:43 pm, edited 1 time in total.
60 + Turbo, 33"s :armsup:
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

hey mate i have a bundera (LJ70) all bunderas are coil.
mines a LX so power windows but its a 2.4L 4cyl carby (22R engine G52 gearbox.) mine had 220,000 on the clock but i got the timing chain replaced @ 216,000kms

i havent herd of a 4.2L petty as standard in a bundera!!

as for what to look for try the rear sliding windows check the edges for rust.

as for cheap transplant i would say 3.8L V6 out of a commodoor.

love mine

Evan...
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Ok, if the 4.2 wasn't standard are there any 6's that where? Talking to the guy on the phone, he doesn't sound like he knew a great deal about cars, even his own, so he could have made a mistake.
60 + Turbo, 33"s :armsup:
Posts: 65
Joined: Tue Aug 08, 2006 6:52 pm
Location: Brisbane

Post by tommyk »

it depends if its a bundy or a bj73, i know the bj's came out with a straight 6 petty but i dont think the bundy ever did
we're here for a good time, not for a long time
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

ok maybe its not a bundera :D I was just going off the looks of it, and i'm far from a toyota connoisseur , here's some pics maybe you guys can ID it:

Image

Image

Image
60 + Turbo, 33"s :armsup:
Posts: 192
Joined: Mon Jul 03, 2006 12:58 am
Location: Penrith

Post by _Mitcho_ »

thats a mid wheel base cruiser. As they say.... not to short, not to long, just right :finger: hahaha
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

nice :lol:

So it'll be a BJ73 then?

Carby?
Can cancel the coil/leaf question cause I can see the leaves in the pics now :lol:
60 + Turbo, 33"s :armsup:
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

most likely its a bj look...
Toyota Land Cruiser 73 Series

73 Series These are commonly called the Mid Wheel Base (MWB) Cruisers. They came out with the FRP (Fiber Reinforced Plastic) tops. They are about 12" longer in the wheel base than the SWB 70's. Powered by the 3F Gasoline engine, or the 3B, the 13BT (basically a turbo 3B), and later the 1HZ (4.2L Diesel), and the 1PZ (a 5 cylinder 3.5L version of the 1HZ). Some of these (gas only) came with an optional 4 speed Automatic transmission. In Venezuela this model is available with the 4.5 liter 1FZ Engine used in the 80 Series!
from here:
http://www.vintageoffroad.com/nav.cfm?id=39

Evan..
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

RockyF70 wrote:nice :lol:

So it'll be a BJ73 then?

Carby?
Can cancel the coil/leaf question cause I can see the leaves in the pics now :lol:
No, it will not be a BJ73, althought there is a high likley hood that it is an FJ73 :finger:

the 4.2 pettys are inline 6 not V

I will be selling my v8 conversion kit soon, that could be a cheap conversion :armsup:
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Hey, I said I'm no expert on yota's :D

Any idea on the economy (or lack there off) with this engine in it? Is she thirsty?
60 + Turbo, 33"s :armsup:
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

v6? :?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

RockyF70 wrote:Hey, I said I'm no expert on yota's :D

Any idea on the economy (or lack there off) with this engine in it? Is she thirsty?
Yep. Expect 17-20l/100km on petrol.
It's a cheap car though - could be a good candidate for a diesel conversion. There is not much room under these for gas tanks so LPG is not very appealing.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

yeah the engine is not going to be cheap to run, they have heaps of room under the bonnet for a conversion, I run the 6.2 V8 chev diesel under mine, you can pick up 1hz pretty cheap these days, but to make that worth while you would want to turbo it, which ya gunna have to throw $2000 odd to get it going which makes V8s worth lookiung at
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 24
Joined: Sun Apr 01, 2007 6:39 am
Location: Cranebrook...Near Penrith

Great little truck

Post by my_73middy »

I am not real sure about answers to your questions but i can assure you that the middy's are a super little truck. I have one with the 3B motor in it, wich i do have to admit is a bit short on power for highway driving. Mine was bog standard when I bought it but has had a few mods since then. Here are a couple of pics of mine so you can see what sort of potential the leaf sprung middy's have.
Cheers Darren
Image Image
My cruiser might not be Pretty, it might not be Fast, but, IT'S BLOODY TOUGH!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests