so i gotta remove my crank to get it machined 
, just wanna know the process for removing the crank on a 1992 hzj75 i have never had a 1hz apart so any tips would be welcome 
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1hz crank removal?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
1hz crank removal?
my woodruff key to the harmonic balancer on the front of my crank has flogged out so i gotta remove my crank to get it machined , just wanna know the process for removing the crank on a 1992 hzj75 i have never had a 1hz apart so any tips would be welcome
so i gotta remove my crank to get it machined , just wanna know the process for removing the crank on a 1992 hzj75 i have never had a 1hz apart so any tips would be welcome Its not a small job, engine out, timing cover, both outer and inner off, sump, main bearing cradle off, then you have a crank out. If you have never done something like this before, dont try it without the factory manual.
Andy
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Who is online
Users browsing this forum: No registered users and 3 guests