Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco 2 Heavy Duty front shafts and CV's, now available.

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 97
Joined: Wed Jan 12, 2005 5:27 am

Disco 2 Heavy Duty front shafts and CV's, now available.

Post by ashtrans »

Hi All,

a long time coming but we are now ready to send out the Disco II heavy duty front shafts and CV's,

Image

stock vs HD :

Image
Image
Image
Image
Image


the kit consists of :

2 x front shafts
2 x CV joints
2 x CV boots
2 x shaft clips
4 x boot clips

Technical notes :

will not interfere with ABS
shafts are 24 spline at each end
straight replacement for stock shafts and CV's, no mods to fit,

the shafts and CV's are covered by a 5 year replacement warranty against failure,

they will be available in Australia through Rovacraft, contact Stewart on :

stuart@rovacraft.com.au
Dave

www.ashcroft-transmissions.co.uk
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

Would these fit a P38 as well ???


thanks Jeff
rover money pit on mogs !!!
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

How much are they?
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 97
Joined: Wed Jan 12, 2005 5:27 am

Post by ashtrans »

jbell wrote:Would these fit a P38 as well ???


thanks Jeff
No, just the D2,
Dave

www.ashcroft-transmissions.co.uk
Posts: 97
Joined: Wed Jan 12, 2005 5:27 am

Post by ashtrans »

Slunnie wrote:How much are they?
Rovacraft will be along shortly with costs,
Dave

www.ashcroft-transmissions.co.uk
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Slunnie wrote:How much are they?
Bloody pricey no doubt, the ashcroft site lists them as 600 pounds
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

Oh well, thats still a hell of a lot cheaper than Maxi-drives equivalent.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests