Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hose under the intake split, what else to do?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 433
Joined: Mon Jul 25, 2005 1:50 pm
Location: Kooralbyn, QLD

Contact:
Contact crosswire

Hose under the intake split, what else to do?

Post by crosswire »

Ello All!

I have an 11/93 80 series 4.5l petrol with 280,000KMs. A water by-pass hose has a rather long split in it and needs to be replaced. The hose comes from up underneath the intake manifold bends around a few times and goes back into the block.
I figured I may as well do as much work as I can while doing this to make it easy. Take the intake manifold off for easier access? Do the PHH (Pesky heater hose as the ih8mud.com guys call it)? Valve cover gasket and clearances?
Anything else I should do at the same time?

Pile on your reccommendations please!
Harold Scruby has hit more pedestrians than me
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Just a little one clean up the throttle body/butterfly just use carby clean on a clean rag don't spray it directly in there aparently it can make the sensors in there go on the piss + i don't realy want to test it out to see so i always do it this way
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests