Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What price for second hand lockers

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

What price for second hand lockers

Post by MONGREL »

As the haeding says jsut wondering what would be a decent price for second hand ARB lockers, front and rear with the air lines switches and whatever else runs them, except the compressor i already have one.

Advice appreciated.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

10 spline or 24 spline??
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

i paid 600 for a 24 spline arb locker 2nd hand, but brand new (never installed). I guess this is the going rate, however i did have to set it up in the carrier, which is a pain in the ass.

It depends on how quick the seller wants to sell them? quickly he'll ask 1K or less the pair, but if they sit on them for a while and dont need the money urgently, they'll ask around $1500 or more.

If its a 10 spline, factor in the cost of new side gears (24 spline ones) and installation.

You can also strike it lucky with wreckers and such, that don't know what they are looking at. I paid 200 for a pair of Jac Mac hypoid lockers with axles, because the seller didn't know what they were. :armsup:

Andy
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

Post by MONGREL »

Not sure on spline as they are still in mates rangie. Was hoping to get the pair for $1000.
Was hoping to swap the whole centres over? Get the better ratio too.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

MONGREL wrote:Not sure on spline as they are still in mates rangie. Was hoping to get the pair for $1000.
Was hoping to swap the whole centres over? Get the better ratio too.
More information?? better ratio?? standard axles??, 1k they're worth buying regardless, setting up the lockers is easy, so long as you know how......I've done the odd one, if you dont, its ugly ;)

Mainly interested in "the better ratio"??
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

Post by MONGREL »

Well he has 35's on it and im pretty sure the ratios were done to suit the 35's.
Dont know anything about diffs in these yet, but thought i might be able to use the whole centre with the locker in it to save me having to pull everthing apart.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Yea they'll swap straight in
Wanted: Car trailer or beaver tail truck, let me know what you got
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests