Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2001 holden jackaroo LWB wagon body lift

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 247
Joined: Wed Apr 19, 2006 9:13 pm
Location: Perth

2001 holden jackaroo LWB wagon body lift

Post by 84mksd33t »

wat do i need to know about doing a 2" body lift on the subjected vehicle?
i have done lots of patrols etc but tehy did not have airbags.

is there anything specific i need to know?
Top
Posts: 62
Joined: Sun Aug 21, 2005 6:56 pm

Post by dogoff »

You have to Keep the bullbar in the same spot if it has one
Top
Posts: 12
Joined: Mon Jul 30, 2007 9:04 am
Location: forestlake qld

Post by corndale1 »

I did a 2inch body lift on my 90 model LWB Jackaroo, very easy. No modifations except that I did lower my radiator to keep it in line with where it used to sit. steering didn't need any work but I did have to bend my auto linkages a bit to get them to line up. Fuel filler will give you no problems. Took me less than one days work and I ain't particually mechanicly minded. I had a local metal fabricator here in Brisvagas make me new bullbar mounts to lift it inline with new body height. GOOD LUCK.
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 2 guests