Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 to 75, what fits
Moderators: toaddog, Elmo, DUDELUX
60 to 75, what fits
This is to the toyota gurus, iv got a mate who has an 1986 60 series, thats been written off but mechanically its all good, low kms. Its the 2H diesel with 5 speed. He has access to a high km cheap 1985 75 series ute, so im wondering what parts would be a straight swap into the 75? Engine, box, transfer etc, any help would be appreciated, thanks.
Re: 60 to 75, what fits
engine, gearbox, transfer all the same, diffs the same but axles and spring perches are different widths. front freewheel hubs, CV's, swivel assemblies etc all the same. the short side front axle is probably the same, short rear axle might also be the same. brakes all the same. front shocks same, not sure on the rear. all interior is different but the 75 interior is better anyway.nayto wrote:This is to the toyota gurus, iv got a mate who has an 1986 60 series, thats been written off but mechanically its all good, low kms. Its the 2H diesel with 5 speed. He has access to a high km cheap 1985 75 series ute, so im wondering what parts would be a straight swap into the 75? Engine, box, transfer etc, any help would be appreciated, thanks.
do it, there is nothing really trick about swapping all the stuff over.
Free air locker to the first 20 callers!
Re: 60 to 75, what fits
dumbdunce wrote:engine, gearbox, transfer all the same, diffs the same but axles and spring perches are different widths. front freewheel hubs, CV's, swivel assemblies etc all the same. the short side front axle is probably the same, short rear axle might also be the same. brakes all the same. front shocks same, not sure on the rear. all interior is different but the 75 interior is better anyway.nayto wrote:This is to the toyota gurus, iv got a mate who has an 1986 60 series, thats been written off but mechanically its all good, low kms. Its the 2H diesel with 5 speed. He has access to a high km cheap 1985 75 series ute, so im wondering what parts would be a straight swap into the 75? Engine, box, transfer etc, any help would be appreciated, thanks.
do it, there is nothing really trick about swapping all the stuff over.
cheers dumbdunce thats the answer i was hoping for. thanks
Re: 60 to 75, what fits
the 60 engine bay is a fair bit wider, and has more room to the bonnet and sides, so any turbo parts, piping, snorkel crossovers will need modifying, the fuel filter brackets are different, depending on the year and there is a few other minor things specific to certain years, but you will find a lot of things swap over very easilydumbdunce wrote:engine, gearbox, transfer all the same, diffs the same but axles and spring perches are different widths. front freewheel hubs, CV's, swivel assemblies etc all the same. the short side front axle is probably the same, short rear axle might also be the same. brakes all the same. front shocks same, not sure on the rear. all interior is different but the 75 interior is better anyway.nayto wrote:This is to the toyota gurus, iv got a mate who has an 1986 60 series, thats been written off but mechanically its all good, low kms. Its the 2H diesel with 5 speed. He has access to a high km cheap 1985 75 series ute, so im wondering what parts would be a straight swap into the 75? Engine, box, transfer etc, any help would be appreciated, thanks.
do it, there is nothing really trick about swapping all the stuff over.
you may need to slide the engine mount back or forward (the block is already machined and tapped for this.
hands and mums dont count!!!
yes
i know the wiring on the engine around the glow rail is very diffrent, just put a 60 series 2h in my brothers 75 and the wiring plugs looked the same but when when we plugged it all in the earth was the postive.
rob
rob
come on move over and let the 75 through
If you have the edic and it's relay you can make a new wiring to keep at sotck ( if you don't have in the 75 series ) and make a wilson switch for glow plugs .. ( 2H )
I would keep the 60 series axles coz the wide ..
I would keep the 60 series axles coz the wide ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Who is online
Users browsing this forum: No registered users and 1 guest