Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

repacking leafs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

repacking leafs

Post by known 2 »

hey. i have some old 2i lifted leafs of my 75 i'm giving to my mate who has a bj70. problem is the rear pack is 12 thick and the front is 9 thick. so we gunna pull them apart and remove someleavs probly down to about 4 ay the front and 4 at the rear. wan't to know wich ones to remove and put back in?

while there apart was thinking about cleening them up with a wire brush and giving them a coat of paint. also i hear that u can put teflon pads in between the springs. were would i get these from and were abouts do they go?

cheers.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

If your intent is too make the pack less stiff, then start with the bottom ones.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

so remove all but the 4 longest ones?
do i have to put the short one on the bottom back on?

the intent is to make them as soft as posible so they flex well.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Start at bottom say drop 2 at a time till it's soft/flexy enough may need to buy shorter centre pins or run a die down the ones in it as all the ones i've seen are only threaded about 20-30mm
plenty of parts on the bench
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

ok thanx.

what about these teflon slip's that can be put betweek the leafs were would i get them from?
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

the teflon only stops them from squeaking and removes a lil friction.
if your realy worried about it use some silicon spray every now n then
friction adds dampening tho:P
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests