just wanted to know if a stockman body will fit on a w/t chassis
cheers daniel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swaping bodys
swaping bodys
88 Zook, Toys, locked, 33's!!
I'm not sure about a stockman and w/t chassis, but i do know that a nt 1.3 body will fit a w/t chassis. But i don't think that a 1L body would do so - or at least, it wouldn't be as easy - some of the body mounts would be different... but this would just mean having to use longer bolts etc rather than using the captive bolts that the current w/t body would have in some of the floor mounts.
i guess that gets you part of the way there
i guess that gets you part of the way there
DMA Founding Member #1 - Now Retired
The stockman is a 1.3 isnt it ??
If so should go on same as narrow track sierra 1.3
If its a 1.0 you should still be able to get it to fit, but your tranny tunnel etc may need a few mods as 1.0 tunnel is narrower than 1.3 model
If so should go on same as narrow track sierra 1.3
If its a 1.0 you should still be able to get it to fit, but your tranny tunnel etc may need a few mods as 1.0 tunnel is narrower than 1.3 model
Last edited by Guy on Wed Nov 05, 2003 1:17 pm, edited 1 time in total.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 1 guest