Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil pipe turbo

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

oil pipe turbo

Post by kond »

Does the oil dump line out of your turbo have to run down [gravity feed] or can it run up hill a bit [pressure feed]
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

should be at least twice the size of the feed, and run down to the sump otherwise the oil will take past of least resistance, into the comp cover and then the engine.

rotate the core or housings to have it up and down or as close too.
cam
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

Must be within 7 degrees of straight down with a constant fall to the sump, above the normal oil level.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest