Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear suspension leveler thingy

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 44
Joined: Tue Jan 25, 2005 5:26 pm
Location: Healesville

rear suspension leveler thingy

Post by 360rangie »

Just want to know, is there any tricks in removing it.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

No.

May need to use hammer and chisel to undo the nut at the bottom ball joint.
John
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

Bush65 wrote:No.

May need to use hammer and chisel to undo the nut at the bottom ball joint.
maybe a grinder too :oops:
Top
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

took the one off my 110 a few weeks ago, pretty easy to do, i just droped the shock mounts off the top and unbolted the top leveler mounts, then raised the chassis till the leveler was fully extended, i used a set of stilsens on the bottom bolt as i couldnt get enough grip on it with a shifter, it came undone easy with the stilsens and some pipe on the handle for leverage.
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

qserv wrote:took the one off my 110 a few weeks ago, pretty easy to do, i just droped the shock mounts off the top and unbolted the top leveler mounts, then raised the chassis till the leveler was fully extended, i used a set of stilsens on the bottom bolt as i couldnt get enough grip on it with a shifter, it came undone easy with the stilsens and some pipe on the handle for leverage.
we tried this, tried heat, tried penetrene, rattle gun... the only thing it didnt argue with was a grinder :D
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest