Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tray mount radiator,how legal, tips
Moderators: toaddog, TWISTY, V8Patrol, Moderators
tray mount radiator,how legal, tips
how legal is a tray mounted radiator in vic and does any body have any tips on how to do it? My 4x4 has already been engineered and is not a daily driver
dont know about the legalities but,i used a ford AU radiator &
its factory thermofan/shroud setup..bent up elbows,& baught
extra heavy-dute radiator hose by the meter,just chech your
pressure,because you might even get away without using
an additional in line water pump,I didnt need one
(not yet anyway)theres pics of it in THE DIRTCOMP mag
on piglet
its factory thermofan/shroud setup..bent up elbows,& baught
extra heavy-dute radiator hose by the meter,just chech your
pressure,because you might even get away without using
an additional in line water pump,I didnt need one
(not yet anyway)theres pics of it in THE DIRTCOMP mag
on piglet
I just had a length of exhaust tube bent to run most of the way from the front to the rear. Then just got some hoses and cut them to suit regarding bends etc. No extra pump needed.
Only draw back with the way mine is mounted is 100% of cooling is done via the fans, it gets NO air flow even at 110km/hr on the highway. I am going to move mine when I get around to it and mount it under my spare wheel rather then hard up behind the cab.
Only draw back with the way mine is mounted is 100% of cooling is done via the fans, it gets NO air flow even at 110km/hr on the highway. I am going to move mine when I get around to it and mount it under my spare wheel rather then hard up behind the cab.
I did the same on my Hilux with a 2poofty3.Guts wrote:I just had a length of exhaust tube bent to run most of the way from the front to the rear. Then just got some hoses and cut them to suit regarding bends etc. No extra pump needed..
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Just a thought. Would a wide-mouthed snorkel type setup help to direct air through your radiator?Guts wrote:
Only draw back with the way mine is mounted is 100% of cooling is done via the fans, it gets NO air flow even at 110km/hr on the highway. I am going to move mine when I get around to it and mount it under my spare wheel rather then hard up behind the cab.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
Yeah it would, man how cool would it look, might put 2 of them on my roll bar and then get a pair of stacks to compliement themGQ Bear wrote:Just a thought. Would a wide-mouthed snorkel type setup help to direct air through your radiator?Guts wrote:
Only draw back with the way mine is mounted is 100% of cooling is done via the fans, it gets NO air flow even at 110km/hr on the highway. I am going to move mine when I get around to it and mount it under my spare wheel rather then hard up behind the cab.
Not needed, just mount it with top of radiator laying forward and the air will come UP threw it without doing anything else. The way your talking about will have 2 different air flows fighting with each other.PGS 4WD wrote:I'm mounting mine with the top of the radiator away from the cab and the bottom closer and putting a scoop on rear roof radius to drag air down into the radiator.
Joel
Mine only gets no air flow because it is basicly hard up beind the cab (about 100mm off it)
NOPE, none at all, doesn't matter how hard or for how long it cops it and never gets hot, even on 40deg days .chunderlicious wrote:guts do you have any troubles with over heating though?
ATM only 1 of the fans is working and it still doesn't get hot, would if it was a 40deg day.
The ONLY dissadvantage of all its cooling being done via the fans is power usage and this is the main reason I am going to move it. Well that and it will look heeps better being hidden with the spare wheel mounted over the top of it. IMHO it looks crap where it is atm.
Best thing was even after the bog hole in the vid it still didn't over heat as the radiator stayed 100% clean and out of the crap If you listen you'll here me say 80. Oh and the smoke is from a cooked power steering
http://www.youtube.com/watch?v=eQbe4gX6H6Y
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic
it depends on your engineer.
mine is OK with moving the radiator to behind the cab, but i have to do cooling tests to satisfy him that the car will remain at the correct temp when driving on the highway.
i've gone for a late model falcon radiator with a factory twin thermo, as well as an auxillary water pump.
i'm only trying to cool a 1.6L though.
mitch
mine is OK with moving the radiator to behind the cab, but i have to do cooling tests to satisfy him that the car will remain at the correct temp when driving on the highway.
i've gone for a late model falcon radiator with a factory twin thermo, as well as an auxillary water pump.
i'm only trying to cool a 1.6L though.
mitch
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
And a few spare aeriels and marker lights like this bloke (not one wire running to 6 aeriels)Guts wrote:Yeah it would, man how cool would it look, might put 2 of them on my roll bar and then get a pair of stacks to compliement themGQ Bear wrote:Just a thought. Would a wide-mouthed snorkel type setup help to direct air through your radiator?Guts wrote:
Only draw back with the way mine is mounted is 100% of cooling is done via the fans, it gets NO air flow even at 110km/hr on the highway. I am going to move mine when I get around to it and mount it under my spare wheel rather then hard up behind the cab.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
my VASS engineer is happy with a rear radiator provided i can guard it to protect bystanders/idiots from injuring themselves on fans etc or getting burned by touching the rad. i also have to protect them from the event of the rad cap releasing, spewing superheated coolant on their pretty little faces.
heres how mine is goin to be mounted behind the cab its a late model falcon radiator and i have standard thermos to go with it aswell i still need to do the piping but hopefully it shoudl be fine
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Who is online
Users browsing this forum: No registered users and 0 guests