Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

single point injection

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 16
Joined: Tue Aug 07, 2007 8:17 pm
Location: rockhampton

single point injection

Post by the man who can »

trying to fit single point injection from some cind of imported suzuki on to a 1.6 and was just wondering if anyone has sucessfully done pulled it off and how they went about it[/img]
Last edited by the man who can on Wed Aug 08, 2007 11:14 pm, edited 1 time in total.
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Little bit more info , what is it off , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

efi 1.6

Post by want33s »

I've got a 1.3 with TBI off an Import Vitara 1.6 . It is controlled by a Haltech F7 ECM. (and laptop)
Can't tell you much more as I haven't had it running since I bought it but it doesn't use an O2 sensor in exhaust????
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Quite a few suzuki EFI cars didn't use an 02 sensor - my 660 doesn't.

Vitara's for the Saudi Arabian Market didn't either. At the same time, Saudi Landcruisers (4.5 petrol) were also carby.... they obviously weren't too worried about fuel economy or emissions!

They run fine, but there is no closed loop mode (so they never learn from what the O2 sensor is telling you) so they tend to run a bit rich
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 16
Joined: Tue Aug 07, 2007 8:17 pm
Location: rockhampton

Post by the man who can »

the injection is from an imported 1.6 litre suzuki and it has an O2 sensor the manifolds bolted straight to my 1.6 but i cant find any info on how it intergrate the ecu into a standard 90 modle loom
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

You will need to get a wiring diagram for a 1.6 MPFI and work out where the wires go. You should have all the sensors so you can work out the wiring and plug types to fit these , Do you have the complete wiring loom for the TBI , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 16
Joined: Tue Aug 07, 2007 8:17 pm
Location: rockhampton

Post by the man who can »

yeah i got the whole loom and a standard ecu/map sensor/O2sensor their's about 100 wires going in to 3 plugs bit of a nightmare
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Once you seperate the wiring for the sensors and the TBI , TPS , temp , air ,O2 , map sensor , injector , these should have factory couplers , you will have a couple power wires a speedo wire , fuel pump , ac , 2-4 earths , diagnostic port , use the wiring diagram to identify each wire and where/what it does , also some cables will go to the instrument cluster , Just label your wires as you work out what they do , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests